Reviewing A Programmed Sequence; Editing A Programmed Sequence; Erasing A Programmed Sequence - Optimus SYSTEM 741 Owner's Manual

13-1288.fm Page 13 Wednesday, July 14, 1999 6:02 PM
3. Press
PROGRAM
the track in the current memory
location. The next memory loca-
tion appears.
(il-
4. Repeat Steps 2–3 for each track
you want to program.
Note: If you program more than
21 tracks, the additional tracks
replace the
grammed tracks.
5. Press
PLAY/PAUSE
on the display and the CD player
plays the tracks in the order you
programmed.
Notes:
• Press
PLAY/PAUSE
stop the music. Press
again to resume play.
PAUSE
• Press
SKIP/SEARCH
SKIP/SEARCH
through the
sequence during play.
Programmed play automatically stops
at the end of the last programmed
track.
To stop the CD player at any time dur-
ing programmed play, press
again to store
currently pro-
. appears
PGM
to temporarily
PLAY/
and
to move
programmed
.
STOP
The CD's total number of tracks and
playing time appear.
Note: To play the programmed se-
quence again, press
.
PLAY/PAUSE
Reviewing a Programmed
Sequence
To review a programmed sequence,
while play is stopped, repeatedly
press . The track number
PROGRAM
and memory position number of each
stored track appear on the display.
Editing a Programmed
Sequence
To edit the programmed sequence, re-
peatedly press
PROGRAM
stored track you want to change ap-
pears on the display.
Press
SKIP/SEARCH
until the new track ap-
SKIP/SEARCH
pears on the display, then press
to store the new track in place
GRAM
of the old one.
Erasing a Programmed
Sequence
To erase a programmed sequence,
you can press
OPEN/CLOSE
before, during, or after pro-
ER
grammed play.
then
PROGRAM
until the
or
PRO-
or
POW-
13