Advertisement
right until you see the name of your CD in the field. This will indicate that
your CD has been selected..
7. Using the cursor down buttons, cursor down to the first named folder in
the display and then turn the jog wheel to further move to the file called
"VintageKeysXS.X0A". The file name will highlight in blue-green.
8. Using the cursor buttons, cursor down to the field marked "Type" and
make sure it is set to "all".
9. Press SF2 "LOAD". Then press the "YES" button on your XS.
10. The Vintage Keys library will load 128 voices to your VOICE User 3 bank.
11. To select the first voice, press the "VOICE" button, then User Bank 3
button, and then button A1 to begin.
As previously stated, the voices are divided into two groups of 64
each, explained in all the sordid details below.
CONTROLLERS –
The Motif XS features an expanded set of controlling knobs – 8
altogether, with assignable Knobs 1 and 2 at the far right of the row.
Additionally, there are two assignable switches (labeled "Assignable
Function) immediately to the left of the eight sliders on the XS.
The assignable knobs 1 and 2, and the assignable switches 1 and 2,
almost always control some aspect of the voice sound. Turn the
knobs or press the switches to see what happens!
The ribbon controller and arpeggio on/off button are not assigned to
the "keyboard" voices of Vintage Keys. However, they are assigned
to some of the "synthesizer voices, where appropriate. More on that
in the notes preceding the synthesizer voice descriptions.
THANKS AGAIN –
To Julian Colbeck, whose book "Keyfax:Omnibus Collection" once
again proved to be an invaluable source of research data, and from
which I shall often quote liberally.
Thanks also to the entire staff of Keyfax New Media, who maintain
the site http://www.motifator.com, where you purchased and
downloaded this library.
About the VOICES
Advertisement
