Installing And Removing The Accessible 5; Inch Drive; Removing An Accessible Drive; Installing An Accessible Drive - Fujitsu ESPRIMO P4 Series Operating Manual

Installing and removing the accessible 5

Removing an accessible drive

► Open the casing (see
Drive, Accessible drive,
► Disconnect the cables connected to the drive.
► Loosen the screws (1).
► Working from behind, slide the drive a short distance out of the bay in the direction of the arrow (2).
The drive now protrudes slightly out of the casing.
► Pull the drive out of the casing (2).
► If necessary, make the required settings on the remaining hard disk drive.

Installing an accessible drive

► Open the casing (see
Diskettedrive, Diskettedrive,
► If there is an accessible drive, please remove it (see
► Remove the front panel from the casing.
► From the inside, press the plastic drive cover out of the front panel.
Fujitsu
"Opening the casing", Page
"Opening the casing", Page
1
31).
1
1
31).
"Removing an accessible drive", Page
System expansions
/

inch drive

4
2
33).
33