Related Manuals for Microjack EYES Pro
Summary of Contents for Microjack EYES Pro
- Page 1 MicroJack EYES Pro Digital Video Surveillance System User’s Manual 300AABCS/400/0616...
- Page 2 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 FCC NOTICE This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable...
-
Page 3: Table Of Contents
Audio ................45 1.4 Hardware Recommendations ..........3 Monitoring ..............47 1.5 Installing the Video Cards ........... 5 Sensors ..............50 1.6 Connecting the MicroJack Video Cards ........8 Relays ................51 1.7 Attaching Cameras ............. 8 Alarms ..............53 1.8 Connecting External Sensor/Relay........9 Networking ..............58... - Page 4 APPENDIX A REMOTE LOGIN WITH AN MODEM-TO-MODEM Status Monitoring .............98 CONNECTION ................. 127 A.1 Windows 98SE / Windows Me ........... 127 Exit / Re-login EYES Pro/MP2016/MP3000/MP5000 ..101 A.2 Windows 2000..............132 CHAPTER 5 USING THE WEBCAM..........102 5.1 Enable WebCam.............. 102 A.3 Windows XP ..............
-
Page 5: Chapter 1 Introduction
With the latest Motion Detection technology, once any movement Product Video Card Specifications detected in the monitoring area, MicroJack EYES Pro/MP2016/MP3000/ 4 EYES Pro 1 card Each video capture card with 4 video inputs MP5000 automatically starts recording and triggers the alarm. -
Page 6: Hardware Recommendations
MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 • 1 / 2 / 4 MicroJack Video Card(s) for EYES Pro 40 GB of free hard disk space, at least 6GB free Hard disk • 1/2 MicroJack Video Card(s) and 1/3 daughter card(s) for space for each partition. -
Page 7: Installing The Video Cards
2. Remove the I/O brackets for the four PCI expansion slots. Save the Internal: screws. • Creative Lab DI5630 (Chipset: Broadxent) 3. Insert the MicroJack video cards into the available PCI expansion • Creative Lab DI5630-5 (Chipset: Broadxent) slots. 4. Replace the computer cover and reconnect all cables. -
Page 8: Connecting The Microjack Video Cards
EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 1.6 Connecting the MicroJack Video Cards MP3016 Video card MP2016 Video card Up to four cameras can be connected to each MicroJack video card - one camera per BNC terminal. D-type 15-pin Connector Cable Infrared Sensor (Optional) -
Page 9: Connecting External Sensor/Relay
Whether you have one, two, three or four video cards, the pattern is the same - cameras will be installed from left to right starting with the top row for EYES Pro and from top bottom beginning... - Page 10 Sensor Inputs Contact Arrangement 1 Form C (SPDT) External sensors such as infrared sensors, smoke detectors, proximity sensors, door sensors, etc., can be attached to the MicroJack EYES Pro/ max. Switch Power 125VA MP2016/MP3000/MP5000’s input-signal connectors on the External I/O max.
-
Page 11: Chapter 2 Driver Installation
Software CD. Click the Next 2.1 Installing the Driver in Windows 98SE/Me button. After you have properly installed the MicroJack video card in your computer, power on your computer and start Windows 98SE/Me. The first time you The Add Hardware... - Page 12 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 (For Windows 98SE only) Insert the Windows 98SE CD-ROM to Select Search start installing the driver. for the best driver for your device. (Recommended) and click the Next button. Click the Finish button...
-
Page 13: Installing The Driver In Windows 2000
Found New Hardware Wizard. Insert the EYES Pro/ MP2016/MP3000/ For EYES Pro, you need to take the procedures (1~14) once for each MP5000 Software video card. For MP3000, you are asked to repeat the procedures 4 CD and click the times;... - Page 14 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 The system will soon You‘ll be show that it has finished prompted to the video driver enter or browse installation. Click the the location of the Finish button. video card driver.
- Page 15 Set the right path and click the OK button. 12. The system will find the For EYES Pro, you need to take the video driver you just procedures (1~14) once for each installed because the video card. For MP3000, you are...
-
Page 16: Installing The Driver In Windows Xp
Windows XP. The first time you install the video card, you will see the Found New Hardware Wizard. Insert the EYES Pro/ MP2016/ MP3000/MP5000 Software CD and You need to continue select Install the installing the audio software driver. -
Page 17: Remove Your Video Card Driver
Capture” and “ARGUS WDM Video Capture” For EYES Pro, you need to take the procedures (1~14) once for each video card. For MP3000, you are asked to repeat the procedures 4 times; for MP2016/MP5000 8 times at most. If you have installed 4 Delete the following files in the video cards, you will find the system’s device manager lookinglike the... -
Page 18: Chapter 3 Software Installation
MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Chapter 3 Software Installation The system will then start preparing to install the MicroJack EYES Pro/MP2016/MP3000/MP5000 application software. 3.1 Installing MicroJack EYES Pro/MP2016/MP3000/MP5000 Software After you successfully install the video card driver, you then are ready to install the EYES Pro/MP2016/MP3000/MP5000 application software. -
Page 19: Software
Choose the System Manager. You components you need to use this need and then password when designate the entering the EYES Pro/ destination folder MP2016/MP3000/ for the software to MP5000 system. Click be installed. Click the Next button to the Next button to continue. -
Page 20: Product Update
EYES Pro/MP2016/MP3000/MP5000 3.2 Product Update 12. After the installation finishes, you can Contact your distributors to obtain the latest software of MicroJack EYES choose to create a Pro/MP2016/MP3000/MP5000 system. After you successfully download shortcut of EYES the file, follow the procedures below to update your software. -
Page 21: Special Consideration
Therefore, it is recommended that you regularly run a defragment utility program on your hard disk such When you first start up the MicroJack EYES Pro/MP2016/MP3000/ as Windows Disk Defragmenter especially before you start saving MP5000, the system will request you to enter user ID and password to recorded videos to the hard disk. - Page 22 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Main Screen Click the System Configuration button to enter the Network Status configuration dialog. You need to first set up your surveillance system Alarm & Relay Status before you start using it.
-
Page 23: System
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Minimum Space System Next you need to provide the minimum space for hard disk Clicking on System brings you to the following dialog box for recycling. During hard disk recycling, the newly recorded files will system information. - Page 24 1 to 60 seconds 480 resolution for the specific cameras. For EYES Pro/MP2016/ (defaults 3 seconds). When in this function is enabled, you need to MP3000, you can check the cameras to perform the better resolution by clicking this button.
-
Page 25: Cameras
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 A. Check Enable to activate UPS meanwhile the Vendor as well as Cameras Model of your UPS will show up in the individual boxes if your UPS is completely connected to. - Page 26 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Settings for the image properties are configured for the designated Figure 1. Enable card, which may also connect to other cameras. That means, the Gray-scale image Check Enable to enable this camera for settings you make for this camera will apply to other cameras that monitoring.
-
Page 27: Audio
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Detection Sensitivity Audio Click Audio to enter the audio page as below. You can click to test the volume of your current environment as a reference when adjusting the sensitivity. The system defaults the sensitivity to 30%. -
Page 28: Monitoring
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Beep upon detected motion: Monitoring By checking Beep upon detected motion, you can enable the this section configure cameras perform alarm to start beeping once motion detected. You can do an monitoring/recording and the related properties. -
Page 29: Sensors
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Motion Detection Mask Sensors Mask Double-click on Sensors to list the sensors already been configured. Mask a specific area to leave the rest area for the motion detection. Right-click the mouse on Sensors to add a new sensor. -
Page 30: Relays
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Relay ID Test In the No. field, you can see the relay number. In the Name field, You can test the sensor immediately after you install it. Click you can set the name for the relay. -
Page 31: Alarms
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 For sensors, select High (Closed/ON) or Low (Open/OFF) to be the Alarms event condition. Note that for the alarm to be triggered, both event conditions for the camera and the sensor have to be Double-click on Alarm to list the alarm already been configured. - Page 32 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Call Out: clicking . After you complete the pager If you have a voice modem installed, you can make the system to or phone information, click to add this call out to landline/mobile phone or pager (maximum 5 sets in total) number to the table.
-
Page 33: Networking
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Networking Click Networking to enter the networking setup page. Provide information for each field. • SMTP Server: The domain name of your mail server or IP address. (eg. microjack.com.tw) • From: The sender’s email address. - Page 34 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Transmitting Cameras Dynamic DNS Here you can select cameras allowed for remote monitoring. In case a dynamic server is severed, please register a domain name with the IP address: ddns.dss.com.tw on line. Refer to Enable WebCam Server Appendix B for the further information.
-
Page 35: Scheduler
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Schedule Recording Scheduler Click Scheduler to enter the setup page for scheduler. You can schedule for monitoring, recording, or enabling network server by date or by weekday. Depending on your needs, after you set all the schedules, you can only enable the ones you currently need and disable the rest, which might be used later. - Page 36 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Task If the time of the schedule you set for a task overlaps with the time of an existing schedule for the same task, the system will give you a warning message below.
- Page 37 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 11. Table Click view each camera’s schedules for the task Record. This table lists all the schedules you have set. You can arrange the order of the schedules by clicking different buttons.
-
Page 38: Backup
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Operation Backup There are three ways to Double-click on Backup to view two backup methods: backup your files: Move: Manual Backup and Schedule Backup. Click either to enter Simply move... - Page 39 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 From/ To Enable Check this to enable a schedule for a backup. You still need to click Here you need to set the start and ending date/time. after you check to enable a schedule.
-
Page 40: E-Map
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 means you can’t span the time to the next day. To backup files Click to abort all the changes made so far for a that cover more than 1 day, you need to separate the files into 2 schedule and restore its last settings. -
Page 41: Users Information
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 First define the name of e-map. Users Information Configure e-map Import Click to enter the setup page for user information. If an image of map (bmp./jpg. formats are supported) has existed, click Import button to input the image which will be shown on the right side screen. - Page 42 Audio Restore to abort all the changes made so far and restore the last settings. Monitoring Authorization Level Sensor The EYES Pro/MP2016/MP3000/MP5000 surveillance system uses Relays the following 4 authorization levels to classify users through password control. Alarms Networking System Manager...
-
Page 43: System Operation
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 4.2 System Operation 9-Camera Display This section describes how to operate EYES Pro/MP2016/MP3000/ MP5000 surveillance system. 12-Camera Display 16-Camera Display 1-Camera Enlarged Display 6-Camera Display 8-Camera Display 10-Camera Display 13-Camera Display... - Page 44 EYES Pro/MP2016/MP3000/MP5000 4-Camera Display 8 EYES Pro/MP3008/MP5008 Click this button to split the screen into a 4-camera display. 8 EYES Pro/MP3008/MP5008 provides 1-Camera Display, screen will first display cameras 1~4. Click it again changes the display to cameras 5~8. Further clicking will change the display to...
- Page 45 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 12-Camera Display 1-Camera Enlarged Display Click this button to split the screen into a 12-camera display. The Click this button to split the screen into a 1-camera enlarged display. screen will first display the camera 1~12. Click it again changes the Further clicking will change the enlarged image to the next camera.
-
Page 46: Start / Stop Monitoring
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 … Focus Camera E-Map The number on each button represents the camera number. These buttons show the status ( enabled / disabled) of each After configuring E-Map section System Configuration, click this button to view the e-maps. -
Page 47: Load / Close Network Server
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Icon Color Status Icon Color Status Log Viewer Yellow Normal Yellow Normal Sensor Log viewer allows you to playback log files from single channel as well Camera as from 4/9/16 channels simultaneously. All the functions here will be introduced in operational order. - Page 48 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Select Display Mode B. Play When you enter this page, first select the display mode by clicking Click the Playback button to play files from start to end. You can also manually drag the slide bar in the directly to...
- Page 49 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Zoom B. Click … the camera no. button to select the camera no. which is switchable during searching. Click to zoom in/out the image. C. Select the required recorded file from the Video Table list and click Close to hide the window.
- Page 50 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 G. Select the desired recorded files and click OK to hide Event Table. Event Search Meanwhile, the status of the files will be seen on event indicator and the playback control panel pops up to replace the condition Searches the recorded files by the alarm condition and action within a search panel.
- Page 51 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 G. Select the desired file and click OK to hide Intelligent Table. Intelligent Search Meanwhile, the status of the file will be seen on Event indicator and the playback panel pops up to replace the search condition Searches the recorded files by Mask Area and Search Interval within setting panel.
-
Page 52: Ptz Controller
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Focus PTZ Controller Press the + and – buttons any time during surveillance to increase/decrease the focal length to get a clearer image. When you click this button, the PTZ control interface will pop up and allows you to control your PTZ cameras. -
Page 53: Status Monitoring
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Status Monitoring Alarm / Relay /Sensor Status On the right side of the main surveillance window is a panel that shows alarm, relay and sensor status. Installed sensors are shown in bright color while not installed ones remain dark. - Page 54 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 The red dot next to the camera/sensor number indicates that the event Network Status condition for this particular camera/sensor has been met. The green This area presents you the current network status. You can also click dot indicates no event occurs.
-
Page 55: Exit / Re-Login Eyes Pro/Mp2016/Mp3000/Mp5000
EYES Pro/MP2016/MP3000/MP5000 Chapter 5 Using the WebCam Exit / Re-login EYES Pro/MP2016/MP3000/MP5000 You can monitor images from the MicroJack EYES Pro/MP2016/ When you want to exit or re-login the system, click to enter the MP3000/MP5000 server using Internet Explorer browser. The MicroJack... -
Page 56: Use The Webcam
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Click Custom Level button to pup up the following dialog. Load Network Server Check Enable or Prompt radio button both in Download signed ActiveX controls and Download unsigned ActiveX Click at the bottom of the main menu to enable the controls. -
Page 57: Chapter 6 Remotemanager
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Chapter 6 RemoteManager number, you can click to switch the screen to display the following cameras. For example, the server has assigned camera 1, 2, 3, 5, 7, 10, 13, and 16, in total 8 cameras for remote transmission. -
Page 58: Setup
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 If a camera is disconnected to the Login server or the signal from the Once you first start the program by server is disconnected to the local clicking the shortcut of Remote Manager... - Page 59 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 6.2.1 User Management 6.2.2 Storage Configuration User Management provides the easy management to safeguard the system from the unidentified users. Only the root is authorized to configure this section. To achieve the setting, complete the following steps: 1.
- Page 60 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Safety Quota: Once the hard disk starts recycling, the system won’t stop until the hard 6.2.4 Schedule Recording disk free space becomes more than a user-defined number, say 6000MB The function allows you to plan the recording schedule by date or (default value).
- Page 61 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 4. Click to confirm the time setting. A settled time will appear on the right blank box. Click Delete to delete the previous time setting. 5. Set the Start and End time by the up and down arrows Time field.
-
Page 62: Operating The Remotemanager
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 To enable an alarm, simply click on Connection via TCP/IP in the Status column and Once the function “Enable Remote View server via TCP/IP” in change the status to the setting of Networking section in system configuration has been Click the OK button to save the checked, you are allowed to add a new server via TCP/IP. -
Page 63: Playback
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 User The multicast servers in LAN will be listed automatically on the left Finish the user’s information given by the specified server. side of the dialog. You can highlight the server which you want to... - Page 64 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Local Playback Playback Click this button to playback the selected file. Reverse Playback. Pause Move to Start Move to End Previous Frame Next Frame Slide Bar You can drag the slide bar directly to the frame you want to play.
- Page 65 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Backup When you review the log files, you can click this button to save the files onto your local disk. Remote Playback Select Remote Playback to configure the further setting...
-
Page 66: Ptz Control
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 6.3.3 PTZ Control Preset Position Setup Once you have installed a PTZ camera, the functional utility will help Each PTZ camera can set 16 preset positions. You can move the camera you to exert the control on the surveillance. -
Page 67: Start Recording
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Dwell (Sec) Start Recording During AutoPan, this button determines the time for the camera to stay Manually enable the recording setting arranged in the Schedule (1~60 seconds) at one position before rotating to the next position. -
Page 68: Appendix A Remote Login With An Modem-To-Modem Connection
Communication dialog box will show up. Check the box next to Dial-up Server and click the OK button. To run RemoteManager over a direct Modem-to-Modem connection between the MicroJack EYES Pro/MP2016/MP3000/MP5000 server and the remote client, follow the instructions in the section of the operating system you are using. - Page 69 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 After finished installing the Dial-up Server, you need to enable Check Allow caller access to enable the Dial-up Server. Click the Dial-up Server. Go to to set the login password and then click Start Programs Accessories Communications and click to change the server type.
-
Page 70: Windows 2000
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 A.2 Windows 2000 Provide the server’s telephone number, including the area code, and click the Next button to finish creating the new connection. 1. Server: Start Programs Accessories Communications Wizard. Click the Next button. and click Network and Dial- up Connections. - Page 71 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Select the ISDN device you’re using and click the Next button. Select users allowed to connect to this computer from the list or click to create new users. For each user, click to set the user’s password, which is...
- Page 72 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 G. Check the boxes next to Allow callers to access my local 2. Client: area network and Specify TCP/IP addresses. Set the A. Go Start Programs Accessories Communications From IP as 192.168.55.1 and the To IP as 192.168.55.2.
- Page 73 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Provide the server’s telephone number, including the area code, Click the Finish button to complete the connection setup. and click the Next button. Go back to the Network and Dial-up Connections window and double-click the connection you just created.
-
Page 74: Windows Xp
MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Select Accept incoming connections and click the Next A.3 Windows XP button. Server: Start Programs Accessories Communications and click New Connection Wizard. Click the Next button. Select the ISDN device you’re using and click the Next button. - Page 75 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Select Allow virtual private connections and click the Next Make sure that Internet Protocol (TCP/IP) is selected and button. click enter Incoming TCP/IP Properties dialog box. Select users allowed to connect to this computer from the list...
- Page 76 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Click the Finish button to complete the ISDN setup for the Select Connect to the Internet and click the Next button. server end. Select Set up my connection manually and click the Next button.
- Page 77 MicroJack User’s Manual MicroJack User’s Manual EYES Pro/MP2016/MP3000/MP5000 EYES Pro/MP2016/MP3000/MP5000 Select Connect using a dial-up modem and click the Next Provide the server’s telephone number, including the area code, button. and click the Next button. Enter any User name and the Password set in step F of the Enter the name of this connection and click the Next button.
-
Page 78: Appendix B Registering Domain Name On Ddns Server148
Password set in step F of the server’s ISDN setup procedure. Click to start connecting to the MicroJack EYES Pro/MP2016/MP3000/MP5000 server. First input the serial number of your product and select the product name. Then click OK to login or Reset to clear the previous input. - Page 79 Please provide the following user information, Host Name, Password, E-mail, Company, and Country to complete the registration procedures. Note that Host Name Domain Name (ex: microjack.dss.com.tw) are the replacement for Internet address while a remote client tends to search a dynamic server in RemoteManager 6.3.1.
Need help?
Do you have a question about the EYES Pro and is the answer not in the manual?
Questions and answers