Canon PowerShot SX150 IS Getting Started page 243

Things to
Remember
4
Click [Import Images from
Camera], and then click [Import
Untransferred Images].
Only images that have not yet been
transferred will start to transfer.
If you use the logger function on
a camera equiped with an internal
GPS function, the GPS log files will
also transfer.
After you click [OK] in the
dialog that indicates the transfer
is complete and close the
CameraWindow screen, the
transferred images will display in
the Main Window.
You can select the newly transferred images
by their shooting dates or My Category
(select models only) classification.
: Folders containing newly acquired images
Images selected with [Photobook Set-up] on the
camera will be saved to the [Photobook] folder.
• Images from memory cards with large numbers of images (more than 1,000) may not transfer
correctly. If this happens, please use a memory card reader to transfer. For details on transferring
images from a memory card reader, refer to "Transferring Images Using a Memory Card Reader".
• Movie files take time to transfer since the files are large.
HINT
Changing the Transfer Destination Folder
The default settings save transferred images into the
[Pictures] or [My Pictures] folders. To change the destination
folder, click the button shown on the right in Step 4
as described above, then click the [Import] button. In the
[Folder Settings] tab, click [Browse] to complete settings in
the screen currently displayed.
The transfer destination folder for GPS log files cannot be changed.
Changing the software that displays after images
have been transferred
You can choose the software that displays after images
have been transferred. Click
of CameraWindow, then click [Import] in the screen that
appears and choose the [After Import] tab. After making
your settings, press [OK] and close the [Preferences] screen.
Table of Contents
Mastering
the Basics
in the upper right corner
More Advanced
Techniques
CameraWindow (Menu Screen)
Appendices
10