Remote Control - LG 47LB5800 Owner's Manual

18

REMOTE CONTROL

REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please
read this manual carefully and use the TV correctly. To install batteries, open the battery
cover, replace batteries (1.5 V AAA) matching the
the compartment, and close the battery cover. Failure to match the correct polarities of
the battery may cause the battery to burst or leak, resulting in fire, personal injury, or
ambient pollution.To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
y
This remote uses infrared light. When in use, it should be pointed in the direction of the TV's remote
sensor.
INPUT
1 2 3
4 5 6
7 8 9
0
FLASHBK
FAV
P
A
VOL CH
G
E
MUTE
SMART
MY APPS
OK
EXIT
BACK
(POWER) Turns the TV on or off.
CAPTION Activates or deactivates the subtitles.
AV MODE Selects an AV mode.
RATIO Resizes an image.
INPUT Changes the input source. Turns the TV on if it is off.
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.
LIST Accesses the saved channel list.
FLASHBK Alternates between the two last channels selected (pressing
repeatedly).
VOL Adjusts the volume level.
FAV Accesses your favorite channel list.
INFO Shows information on the current program.
MUTE Mutes all sounds.
CH
Scrolls through the saved channels.
PAGE Moves to the previous or next screen.
SETTINGS Accesses the main menu.
SMART Accesses the Smart Home menu.
MY APPS Shows the list of Apps.
Navigation buttons Scrolls through menus or options. (up/down/left/right)
OK Selects menus or options and confirms your input.
BACK Returns to the previous screen.
Q.MENU Accesses the quick menu.
EXIT Clears all on-screen displays and returns to TV viewing.
Color buttons ( : Red,
These access special functions in some menus.
Control buttons ( , , ,
(USB,SIMPLINK).
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
SLEEP Sets the length of time until the TV to turns off.
VD / Enables VD function. SAP(Secondary Audio Program) Feature can also
be enabled by pressing the VD key.
TV Returns to the last TV channel.
and ends to the label inside
: Green, : Yellow, : Blue)
, ) Controls the SIMPLINK compatible devices