How To Use; Cleaning & Maintenance - Inalsa Boost Instruction Manual

How to use

1. Assemble the juicer and put the safety looks on.
2. Place the juice and pulp container jars in place.
.3. Plug the juicer to the power source.
4. Switch the unit ON
5. Cut the fruits into small pieces and put into the juicer through the feeder tube.
6. Push the fruits with the food pusher.
7. Juice and pulp will start collecting in the juice and pulp collector respectively. Empty the
two containers as soon as they are about to be full.
Cleaning & Maintenance
1. Place the base on a dry flat surface
2. Clean Food Pusher, Cover, Pulp Collector, and Juicer mesh with soapy water and rinse
thoroughly. To remove pulp from Juicer mesh, hold bottom side facing up under running
water and gently scrub with a soft nylon brush.
3. To protect against risk of electrical shock do not put the main unit in water or other
liquids.
4. Never use gas or alcohol to clean any part of the unit. Never put any part of the Juice
Extractor in dishwasher or boiling water.
5. If not in use please put the juicer in a dry place to protect the motor. It is good to use the
unit frequently.
4