Advertisement
Quick Links
EV-2100 Quick Start Guide
Congratulations and thank you for your EV-2100 purchase. This guide will
help you start using your EV-2100 device as quickly as possible. A more
extensive User's Manual is included on the enclosed CD.
InternetVue 2100:
Note: Color scheme may vary
Video Outputs:
VGA and DVI
Audeo Outputs:
3.5mm stereo
Audio Cable:
3.5 stereo male – male
Power
VGA
DVI
Overall Requirements:
TV or projector with RGBHV HDB15 (VGA) or DVI-D video inputs
PC running:
–
Windows XP or Vista RC1
– Pentium 4 or M, 1.8 GHz or faster; slower CPUs okay for viewing slow-moving
or static images
– 512MB RAM or more (1024MB RAM recommended for Vista)
– Wired (10/100) or wireless (802.11b/g) network connection; WEP, WPA/WPA-PSK
with TKIP or AES encryption supported
Audio
RJ45
Make sure that the TV or projector and the EV-2100 is
unpowered. Connect the EV-2100 to your TV or projector's
associated AV inputs
2
Connect the power adapter to the EV-2100 power jack input rst
(a), and then plug in the power adapter into and AC outlet
(b), Power on your TV or projector and select the associated AV input.
(a)
(b)
Advertisement
Summary of Contents for Addlogix EV-2100
- Page 1 Connect the EV-2100 to your TV or projector’s associated AV inputs Congratulations and thank you for your EV-2100 purchase. This guide will help you start using your EV-2100 device as quickly as possible. A more extensive User’s Manual is included on the enclosed CD. InternetVue 2100:...
- Page 2 LAN or within wireless range. If this happens, select the EV-2100 by its ID as shown in the previous step. PC2TV is a trademark of Quartics, Inc. Windows is a registered trademark and Vista is a trademark of Microsoft Corporation in the United States and other countries.
Need help?
Do you have a question about the EV-2100 and is the answer not in the manual?
Questions and answers