Table of Contents
Advertisement
Installation/Removing the Unit
Removal Tool (Accessory
@)
• The frame can be removed from the top side in the same
manner.
Removal Tool
(Accessory
@)
• Be careful
to
avoid injury from the catch pins on the
removal tool.
Q
~
3. Lower the removal tool toward the bottom, and
pullout the unit halfway while pressing towards
the inside.
1. Remove the hard rubber frame by referring to the
removal procedure in the section <Removing the
Hard Rubber Frame>.
2. Insert the two removal tools
@
deeply into the
slots on each side, as shown.
Removing the Unit
~
~
1. Engage the catch pins on the removal tool
@
and
remove the two locks on the lower level.
Lower the frame and pull it forward as shown in
the figure.
Escutcheon (Accessory
@)
~,~
Removing the Hard Rubber Frame
(escutcheon)
4. Pull the unit all the way out with your hands, being
careful not to drop it.
8
I
KVT-614
Advertisement
Table of Contents
