Page 5
The Tri- of near field monitoring. Separate sub-woofer place- dent HG3 uses crossover points set at 320 Hz and ment is a hit or miss proposition, guaranteed to cause 3,500 Hz to eliminate those problems. The unique cab- problems in poorly treated rooms inet design takes care of the rest.
LED is built into the front panel of the Tri- the critical directional components exactly where dent HG3 that changes from green to red as you begin needed, regardless of the distance between cabinets, to approach audible distortion levels (above 1%).
Mid/High Level Controls frequency imaging of the HG3's. Listen especially to The Mid Range/High Range Level Controls are nor- the even response of the upright bass, the rock steady...
CONNECTING THE SPEAKERS You can connect the HG3's using any of four different connection types: Balanced XLR or 1/4” TRS - or unbal- anced 1/4” TS or RCA Phono cables. When using unbalanced connections, do not use cables over 12' (4m) to...
hg3_user_guide_manaul_v06:Layout 1 10/3/11 2:59 PM Page 9 TROUBLE SHOOTING 1) No Power. Make sure the unit is selected for the correct mains voltage via the selector incorporated in the mains inlet socket on the back of the unit. Check the fuse if the unit has been powered with the wrong voltage. Check there is a power reaching the unit.
Page 10
He considers the Trident HG3 to be his best design, and its innovations will lead to stellar future products.
Need help?
Do you have a question about the HG3 and is the answer not in the manual?
Questions and answers