Table of Contents
Advertisement
Quick Links
Note to Users
This User's Guide & Technical Reference are for assisting system manu-
facturers and end users in setting up and installing the motherboard. Every
effort has been made to ensure that the information in this manual is
accurate. Weal Union Development Limited is not responsible for print-
ing or clerical errors. Information in this document is subject to change
without notice and does not represent a commitment on the part of Weal
Union. For previous or updated manuals, BIOS, drivers, or product
release information, please contact Weal Union Development Limited at
http://www.tigatech.com or through any of the means indicated on the
following pages.
Companies and products mentioned in this manual are for identification
purposes only. Product names appearing in this manual may or may not be
registered trademarks or copyrights of their respective owners.
WebSite:
Email:
Product Name: TI-810+
Version:
Edition:
http://www.tigatech.com
tsc@wealunion.com
1.01
November, 2000
Page 1
TI-810+ Motherboard
Advertisement
Table of Contents
Summary of Contents for Weal Union TI-810+
- Page 1 Every effort has been made to ensure that the information in this manual is accurate. Weal Union Development Limited is not responsible for print- ing or clerical errors. Information in this document is subject to change without notice and does not represent a commitment on the part of Weal Union.
-
Page 2: Table Of Contents
TI-810+ Motherboard Table of Contents Chapter 1 Introduction............3 1.1 Product Features ..................3 1.2 Full Software Configurable ..............3 1.3 Features Summary ................... 4 Chapter 2 Installation.............5 2.1 Installation Instructions ................. 5 2.2 Motherboard Layout ................5 2.3 Function & Installation Instructions ............ 6 2.3.1 AT Power Supply Connector ............ -
Page 3: Chapter 1 Introduction
TI-810+ Motherboard Chapter 1 Introduction 1.1 Product Features The TI-810+ highest performance motherboard is based on the all new Intel 810 chipset with Baby AT form factor to support the latest Socket 370 including Intel Pentium III FCPGA, Celeron FCPGA / PPGA as well as Cyrix III processors. -
Page 4: Features Summary
High Graphics Resolution up to 1600x1200 with 8-bit Colour Full Support for Microsoft Direct 3D and Direct Draw Integrated AC97 Audio Onboard (Models TI-810+ES and TI-810+S only) AC97 2.1 Compliant Codec with 3D Stereo Enhancement 1 x Line-out, 1 x Line-in, 1 x Mic-in... -
Page 5: Chapter 2 Installation
TI-810+ Motherboard Chapter 2 Installation 2.1 Installation Instructions This section covers External Connectors and Memory Configuration. Please refer to the motherboard layout chart for external connectors, slots and I/O ports. Further- more, this section lists all necessary connector pin assignments for your reference. The locations of the connectors and ports are illustrated in the following figures. -
Page 6: Function & Installation Instructions
TI-810+ Motherboard 2.3 Function & Installation Instructions 2.3.1 AT Power Supply Connector (12-Pin) This connector connects to a standard 5V power supply. To connect the leads from the power supply, ensure first that the power supply is not power on. Most power supplies provide two plugs, and each plug contains six wires. -
Page 7: At Keyboard Connector
TI-810+ Motherboard 2.3.3 AT Keyboard Connector This connector supports a standard IBM-compatible keyboard, such as 101/102 enhanced keyboard (Use a PS/2 keyboard adapter in order to connect a PS/2 KB to this AT connector.). 2.3.4 Serial (COM1/COM2) Port Connector This motherboard provides two compatible serial ports, it can be used when add additional serial devices. -
Page 8: Sdram Sockets
TI-810+ Motherboard EXPANSION CARDS INSTALLATION Before adding or removing any expansion cards or system components, confirm that you already unplugged your power supply. Otherwise, it may severely damage to your motherboard and expansion cards. Please follow the installation procedures as below: 1. -
Page 9: Bios
TI-810+ Motherboard If you install two IDE devices on the same cable, you must configure the second device to slave mode by setting its jumper accordingly. (Refer to your IDE device document for the jumper settings. Pin 20 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 20 plugged.) Primary IDE (IDE1) Pin1... -
Page 10: Pga370S Cpu Socket
+12V Pin3 2.3.17 Audio Connector (Available for TI-810+ES and TI-810+S model only) This connector supports the optional connector set for audio input/output and game/MIDI port. The connector set connects to the 26-pin block and mounts to an open slot on your computer’ s chassis. -
Page 11: Internal Audio Connectors
TI-810+ Motherboard 2.3.18 Internal Audio Connectors(CD, AUX, 4-pin Modem) These connectors allow you to receive stereo audio input from such sound sources as a CD-ROM, MPEG card. The Modem connector allows the onboard audio to interface with an voice modem card with a similar connector. It also allows the sharing of mono_in (such as a phone) and mono_out(such as a speaker) between the onboard audio and the voice modem card. -
Page 12: Chapter 4 Ami Bios Setup
TI-810+ Motherboard Chapter 4 AMIBIOS Setup This TI-810+ motherboard comes with the AMI BIOS from AMI Software Inc. Enter the AMI BIOS program Main Menu by: 1. Turn on or reboot the system. After a series of diagnostic checks, the following message will appear: Press <DEL>... - Page 13 TI-810+ Motherboard 3. Using the arrows on your keyboard, select an option, and press <Enter>. Modify the system parameters to reflect the options installed in your system. Otherwise you may return to the Main Menu anytime by pressing <ESC> . Types of Setup Description Standard CMOS Setup...
-
Page 14: Standard Cmos Setup
TI-810+ Motherboard AMIBIOS SETUP - STANDARD CMOS SETUP (C)1998 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Mon Sep 25, 2000 Base Memory: 0 KB Time (hh/mm/ss) 17:05:08 Extd Memory: 0 MB Floppy Drive A: 1.44 MB 3½ Floppy Drive B: Not Installed 32Bit Type... - Page 15 TI-810+ Motherboard Type How to Configure SCSI Select Type. Select Not Installed the drive parameter screen. The SCSI drivers provided by the SCSI manufacturer should allow you to config- ure the SCSI drive. Select Type. Select Auto to let AMIBIOS determine the parameters. Click on OK when AMIBIOS displays the drive parameters.
-
Page 16: Advanced Cmos Setup
TI-810+ Motherboard 4.2 Advanced CMOS Setup The AMIBIOS Setup options described in this section are selected by choos- ing Advanced CMOS Setup from the AMIBIOS Setup main menu. 4.3 Advanced Chipset Setup Choose Chipset Setup on the AMIBIOS Setup main menu. All Chipset Setup options are then displayed.