Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MPC F1925
Summary of Contents for MPC F1925
- Page 1 F1925 LCD Monitor User’s Guide...
-
Page 2: Table Of Contents
Table of Contents User’s Guide................3 Packing List.................3 Safety Information ..............3 LCD Monitor Features ............5 Setup Instructions ..............6 Monitor Base ..................6 Power Cord and Power Adapter ............6 Video Cables ..................8 Adjusting the Viewing Angle..........8 Operating Instructions ............9 General Instructions ................9 Front Panel Controls ................ -
Page 3: User's Guide
PACKING LIST Before setting up and using your monitor, examine the items in the monitor package. If anything is missing or damaged, please contact MPC immediately. Look for the following items: • 19” LCD Monitor •... - Page 4 • The monitor must only be connected to the AC power source as indicated on the label. If you are unsure of the type of AC power available, ask your local power company. Only connect this monitor to a power outlet that matches the power requirements of this monitor.
-
Page 5: Lcd Monitor Features
• The life of the internal fluorescent backlights used in the LCD monitor is approximately 10,000 hours. Contact MPC technical support or an authorized dealer for a replacement when the screen is dark, flickering, or not lighting up. Never attempt to replace the... -
Page 6: Setup Instructions
SETUP INSTRUCTIONS The following sections provide information about attaching the base to your monitor and using the power cord and video cable. Monitor Base To install the monitor base, place the monitor in the base until it snaps into place. To remove the monitor base, gently turn the monitor upside down and press the four retention clips apart to release the base. - Page 7 • This monitor has a universal power supply. It can operate in either a 100/120 VAC or 220/240 VAC voltage area (no user adjustment is required). • Make sure the power cord meets the specifications and requirements for your area. The power cord included with your monitor is rated for 100/120 VAC.
-
Page 8: Video Cables
Video Cables The monitor comes with separate video cables for analog and digital connections. The cable you choose to use will depend on the input type you select. The analog cable has a blue 15 pin connector at each end. The digital cable has a white 24+ pin connector at each end. -
Page 9: Operating Instructions
OPERATING INSTRUCTIONS The following sections provide information about operating and adjusting your monitor. General Instructions To turn on the monitor, do the following: Check that the power supply is connected to the monitor and a power outlet or socket. Check that the video cable is connected to your computer’s video port. -
Page 10: Accessing The Adjustment Controls
Table 1: Control Buttons Descriptions Feature Description The Auto Config button is used to automatically set Auto the H-Pos, V-Pos, Clock, and Focus. Press and hold Config/Exit this button for 2 seconds to begin the auto config cycle. The Auto Configuration function is disabled when the digital input is selected. -
Page 11: Adjusting The Picture
H:60KHz V:75KHz Contrast EXIT Figure 5: On Screen Display (OSD) Menu Note: If you do not make any OSD menu adjustments or selections for more than 10 seconds, the current setup will be saved, and the OSD will disappear automatically. Adjusting the Picture The table below describes the functional control icons that appear on the OSD menu. - Page 12 H-Position Use this function to adjust the picture’s horizontal position. V-Position Use this function to adjust the picture’s vertical position. Input Select Use this function to select analog or digital input. When Digital is selected the following controls will be disabled: Clock, Phase, H- Position and V-Position.
-
Page 13: Cleaning The Monitor
If your application requires a specific monitor driver and color matching profile, these can be downloaded from the MPC Technical Support Site at http://support.buympc.com/index.html. If you do not have Internet access, you may also call MPC Technical Support at (800) 877-8856 to request the files be sent to you. -
Page 14: Warranty Information
WARRANTY INFORMATION In the unlikely event that you have a failure with your MPC monitor, you can contact MPC Technical Support at http://support.buympc.com/index.html. If you do not have Internet access, you may also call MPC Technical Support at (800) 877-8856. Technical Support will provide you with instructions for returning the failed monitor. -
Page 15: Appendix A - Troubleshooting
If the following information does not successfully solve your issue, please visit the MPC Technical Support Site at http://support.buympc.com/index.html. If you do not have Internet access, you may also call MPC Technical Support at (800) 877-8856. Table 3: Troubleshooting Monitor Issues... - Page 16 • Your computer may be in a low power state. Move the system’s mouse and press several keys on the keyboard to wake the system. • The monitor’s picture Inspect the monitor’s video cable and make is missing one of the sure that none of the pins are bent.
-
Page 17: Appendix B - On-Screen Messages
APPENDIX B — ON-SCREEN MESSAGES Table 4: On-Screen Messages Message Action • “Cable Not Check that the signal cable is properly Connected” connected. If the connector is loose, tighten the connector screws. • Check the DB-15 plug on the video cable for bent pins or other damage. -
Page 18: Appendix C - Factory Preset Timing
APPENDIX C — FACTORY PRESET TIMING Table 5: Factory Preset Timing Digital and Analog support are the same except where noted below. Standard Resolution Horizontal Frequency Vertical Frequency 640 x 400 31.469 kHz 70.0 Hz 720 x 400 31.469 kHz 70.0 Hz 640 x 480 31.470 kHz... -
Page 19: Appendix D - Vesa Mounting
APPENDIX D — VESA MOUNTING This monitor can be attached to a wall-mounting arm you purchase separately. This monitor has a 75 mm x 75 mm VESA compliant mounting pad. Use a wall mounting arm with this configuration ONLY. Take care to properly support this monitor during this procedure so that damage to the LCD panel does not occur. -
Page 20: Appendix E - Connector Pin Assignment
APPENDIX E — CONNECTOR PIN ASSIGNMENT Figure 7: 15-pin Color Display Signal Cable Table 6: Analog Video Cable Pin Assignments Pin # Description Pin # Description Green Detect Cable Blue Ground DDC-Serial Data Ground H-sync R-Ground V-sync G-Ground DDC-Serial Clock B-Ground Figure 7: 24-pin DVI Signal Cable... -
Page 21: Appendix F - Acceptable Lcd Defects
Table 8: Digital Video Cable Pin Assignments Pin # Description Pin # Description TMDS RX2- Floating TMDS RX2+ +5V Power TMDS Ground Ground Floating Hot Plug Detect Floating TMDS RX0- DDC Clock TMDS RX0+ DDC Data TMDS Ground Floating Floating TMDS RX1- Floating TMDS RX1+... -
Page 22: Appendix G - Monitor Specifications
APPENDIX G — MONITOR SPECIFICATIONS Table 9: Monitor Specifications • LCD Panel Type: Dual Input TFT Active Matrix Color • Size: 48.0 cm (19.0") • Viewable Size: 19.0” • Pixel pitch: 0.294 mm • Viewing angles: 170° (H) 170° (V) (Typical) •... - Page 23 Analog and Digital: Input Video Signal • 0.7Vp-p (standard) • 75 OHM • Positive • Power Source AC Source: 100 – 240 VAC 50/60 Hz • DC Adapter: 12 VDC 5 A • Environmental Operating Temp: 0° to 40°C Considerations •...
-
Page 24: Appendix H - Fcc Notice
APPENDIX H — FCC NOTICE FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the F1925 and is the answer not in the manual?
Questions and answers