Specifications - Panasonic SC-HTB18 Operating Instructions Manual

Specifications

AMPLIFIER SECTION
RMS Output power : Dolby Digital Mode
Front ch (non-simultaneous drive)
30 W per channel (1 kHz, 10 % THD, 4 ≠)
Subwoofer ch
60 W (100 Hz, 10 % THD, 8 ≠)
Total RMS Dolby Digital mode Power
TERMINALS SECTION
Digital Audio Input (TV)
Optical digital input
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Audio Format
LPCM, Dolby Digital, DTS Digital Surround
Analog audio input (BD/DVD)
Audio input
Speaker output
Subwoofer
SPEAKER SECTION
FRONT SPEAKER (L/R)
Type
Unit(s)
Impedance
SUBWOOFER
Type
1 way, 1 speaker system (Bass-ref)
Unit
Impedance
120 W
Optical terminal
Pin jack
1 way, 1 speaker system
8 cm k2 (Cone type)
4 ≠
16 cm (Cone type)
8 ≠
Bluetooth
Bluetooth system specification
®
Wireless equipment classification
Supported profiles
Supported codec
Frequency band
Operating distance
GENERAL
Power consumption
TM
Power consumption in standby mode
Power supply
Main unit
1
For table top layout
Dimensions (WkHkD)
For wall mounting layout
Dimensions (WkHkD)
Mass
Subwoofer
Dimensions (WkHkD)
Mass
Operating temperature range
Operating humidity range
20 % to 80 % RH (no condensation)
≥ Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
≥ Total harmonic distortion is measured by a digital spectrum
analyzer.
SECTION
®
Bluetooth Version 3.0
®
Class 2 (2.5 mW)
A2DP (with SCMS-T)
2.4 GHz band FH-SS
approx. 10 m Line of sight
Approx. 0.5 W
AC 220 V to 240 V, 50 Hz
750 k65.5 k118 mm
750 k115 k65 mm
Approx. 2.3 kg
156 k290 k263 mm
Approx. 3.0 kg
0 C to r40
o
VQT5J46
SBC
35 W
C
o
23