Samsung 670 Installation Manual page 24

No Item
REACH Server
update Time
REACH Update
Immediate
REACH Server
Channel
REACH Server
REACH
16
Version
Server
REACH Server
Group ID
S-LYNK
REACH
S-LYNK
REACH Volume
TICKER
Self Diagnosis
for TV
17 Service
Self Diagnosis
for HTV
Upgrade Now
Service Pattern
TV Reset
REACH (Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are only available in stand-
alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the REACH server
product for more information on operating it.
24
English
Sub item
Standalone
OFF / 1hour /
2hour / 12:00
am / 2:00 am / 1hour
12:00 pm / 2:00
pm
On/Off Off
*** 87
*** 0000
All, 1 - 511 ALL
On/Off Off
On/Off On
On/Off Off
*** -
*** -
***
*** -
*** -
Initial Value
Description
Interactive
Select the SIRCH update Time.
In the SIRCH update time , you have the
option to perform an automatic upgrade at
n/a
12:00 AM/PM or at 2:00 AM/PM. You can
perform hourly upgrades at an interval of
either 1 hr or 2 hrs.
On : Whenever the TV enters Standby
mode, always performs the SIRCH Update
n/a
Off : Only performs the SIRCH Update at the
selected SIRCH Update Time
n/a Select SIRCH Update Channel
Display the version of the SIRCH Clone file
n/a
currently updated on the TV.
n/a
Select the SIRCH Group ID
n/a Enable or Disable the REACH Display
On: T he TV sound in the current TV source
n/a
Off: T he TV sound in the current TV source
On: The TICKER contents is displayed.
n/a
Off: The TICKER contents is not displayed.
Enter the Self Diagnosis Menu.
Picture Test: Use this to check for picture
problems. If the problem appears in the test
picture, select Yes and follow the directions on
- the screen.
Sound Test: Use the built-in melody sound
to check for sound problems. If the problem
occurs during the test, select Yes and follow
the directions on the screen.
This lets you check the state of the Variable
audio out and the communication with
the SI STB or SBB. If you encounter any
-
problems in the variable audio out feature
or communication with the SI STB or SBB,
please check this items.
Upgrade the TV software.
- Display the Service pattern.
-
Reset the TV.
is output continuously even though the
S-LYNK REACH menu is displayed.
is stopped when the S-LYNK REACH
menu is displayed.