Specifications; Installation Notes; Speaker Wiring - Hifonics XX-Colossus II Owner's Manual

Congratulations
Congratulations on your purchase of quality HiFonics car audio gear. Years of testing and development
have gone into each HiFonics product,and you can rest assured that you've purchased the best. Your
precision engineered HiFonics components will perform best when installed by experienced installers.
Therefore, we highly recommend that you contact your authorized HiFonics dealer to help customize
and install your system.
HiFonics Audio Products are made to withstand years of hard use, and to consistently deliver audiophile
quality sound.
A great deal of thought has gone into the compilation of this Operation and Instruction manual, and it is a
valuable reference to achieve the best possible performance from your HiFonics equipment.
CONTENTS

Specifications

Installation Notes

Wiring, Phase Shift
Functions and Controls

Speaker wiring

Stereo-Subwoofer-Mode
Mono-Subwoofer bridged
Trouble Shooting
Channels
Output Power Ratings at 14.4 Volts
Watt at 4 Ohm load
Watt at 2 Ohm load
Watt an 1 Ohm load
Mono bridged at 4 Ohm
Mono bridged at 2 Ohm
Frequency response -3dB
Damping factor
Signal to noise ratio
Channel seperation
THD&N
Input Sensitivity- RCA
Input Impendance - RCA
Input Sensitivity - balanced
Input Impendance - balanced (variabel)
Crossover - Switch for 1 & 2 Channel
Highpass / Full range / Lowpass / Bandpass
Variable Highpass - 12dB/Oct
Variable Lowpass - 12dB/Stereo - 24dB/Mono
Variable Subsonic-Filter 24dB/Oct
Crossover - Switch for 3 & 4 Channel
Highpass / Full range / Lowpass / Bandpass
Variable Highpass - 12dB/Oct
Variable Lowpass - 12dB/Stereo - 24dB/Mono
Variabler Subsonic-Filter 24dB/Oct
Crossover - Switch for 5 Channel
Variable Lowpass - 24dB/Mono
BassBoost continously variable
Bass EQ continously variable
Q Control Wide - Narrow
Phase Shift Switch only 1/2-Channel
Phasen shift continously variable
Phase Shift
(\ = controlled together )
RCA-Output
RCA-Inputselector
Bass Remote Control with PROTECTION-LED
Maxi-Fuse
Abmessungen in mm
width x hight
Length without / with Endpanels
OWNER`S MANUAL
Specifications
XX-COLOSSUS II
Class D
2
600 x2
1100 x2
1500 x2
2200
3000
2Hz - 70kHz
400
98dB
-
0.10%
0.2 - 9 Volt
20 kOhm
0.4 - 18 Volt
0.6 kOhm - 47 kOhm
TP
-
25Hz - 250Hz / 24dB
10Hz - 50Hz
-
-
-
-
-
0dB - 18dB
30Hz - 60Hz
Ja
-
0° - 180°
1\2
Yes
-
Yes
External 300 Ampere
285 x 74
525 / 653
Page
9
10
11
12
13
14
15
9