Subscribe to Our Youtube Channel
Related Manuals for Triton Blue WALLY 136
Summary of Contents for Triton Blue WALLY 136
- Page 1 PROFESSIONAL LED Lighting USER MANUAL WAL LY 136 KEEP THIS MANUAL FOR FUTURE NEEDS...
- Page 2 XM340-V1.0 - A...
- Page 3 CAUTION! For your own safety, please read this user manual carefully before you initial start-up. Every person involved with the installation, operation and maintenance of this device has to - be qualified - follow the instructions of this manual - consider this manual to be part of the total product - keep this manual for the entire service life of the product - pass this manual on to every further owner or user of the product - download the latest version of the user manual from the Internet...
-
Page 4: Description Of The Device
DESCRIPTION OF THE DEVICE Features • 3, 4 or 6 DMX channels selectable for numerous applications • Equipped with 36 x 1 W LEDS: 12 x red, 12 x blue, 12 x green • 100 000 hours LED life • The LEDS can be controlled individually •... - Page 5 Overview 4 5 6 7 (1) Housing (2) LEDS (3) Floor-stand (4) Menu-button (5) Up-button (6) Down-button (7) Enter-button (8) Power input (9) DMX output (10) DMX-input XM340-V1.0 - A...
-
Page 6: Safety Instructions
SAFETY INSTRUCTIONS This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. -
Page 7: General Guidelines
out the plug by tugging the power cord. During initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean that the device is defective, it should decrease gradually. Please don't project the beam onto combustible substances. Fixtures cannot be installed on combustible substances, keep more than 50cm distance with wall for smooth air flow, so there should be no shelter for fans and ventilation for heat radiation. - Page 8 current which stated in the technical specifications in the last page of this manual, the device was designed for indoor use only. Lighting effects are not designed for permanent operation. Consistent operation breaks may ensure that the device will serve you for a long time without defects.
-
Page 9: Installation Instructions
INSTALLATION INSTRUCTIONS Mounting the device The installation of the effect has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation. The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety rope. - Page 10 Cautions: The effect should be installed outside areas where persons may reach it, walk by or be seated. Overhead mounting requires extensive experience, including amongst others calculating working load limits, installation material being used, and periodic safety inspection of all installation material and the device. If you lack these qualifications, do not attempt the installation yourself.
-
Page 11: Overhead Rigging
Overhead rigging Screw the bolt of the clamp into the hold of the bracket, and tighten the screw underneath. Pull the safety-rope through the holes on the bracket of the base and over the trussing system or a safe fixation spot. Insert the end in the carabine and tighten the safety screw. -
Page 12: Dmx-512 Control Connection
DMX-512 control connection Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the LED lighting. You can chain multiple LED lighting together through serial linking. The cable needed should be two core, screened cable with XLR input and output connectors. -
Page 13: Operation
OPERATION Display menu MODE AXXX Set dmx address ADDR( (1-512)( Display “Blackout” function. When activated the DISP( display will automatically blackout when not in use ON/OFF( When “ON” this function rotate the display 180° FLIP( ON/OFF( 3 dmx channels (rgb) 3 CH( 4 dmx channels (rgb+master dim) CHAN(... - Page 14 001-255 Set chase fade FADE( 000-255 Set chase strobe STRB( 001-255 Set chase speed SPED( CHS6( 001-255 Set chase fade FADE( 000-255 Set chase strobe STRB( 001-255 Set chase speed SPED( CHS7( 001-255 Set chase fade FADE( 000-255 Set chase strobe STRB( 001-255 Set chase speed...
- Page 15 Example: we set SPEED ==1second, and FADE ==1second, the 1st step is Red 100% open, the 2nd step is green 100% open, the 3rd step is Blue 100% open. So, the Chase would come out as: 1, The Red 100% open and stay for 1second (SPEED) 2, Then Red drop down from 100% to 0%, the same time Green from 0% to 100%, in 1second (FADE) 3, The Green stay 100% for 1second...
- Page 16 d. Press the UP button to display “ON” to activate this function, or “OFF” to deactivate this function. e. Press ENTER to confirm. f. Press MODE/ESC to return to the main menu. 3. Controller Settings: a. Set the DMX value of channel 1 to a value of 7. b.
-
Page 17: Instructions On Use
2: INSTRUCTIONS ON USE: DMX channel´s functions and their values (6 DMX channels): Mode/Channel Value Function group Red : 0-255 Red ( 0-Black , 255-100% Red ) group Green: 0-255 Green ( 0-Black , 255-100% Green ) group Blue: 0-255 Blue ( 0-Black , 255- 100% Blue ) General dimming: 0-255... - Page 18 Random strobe effect slow to fast 192-223 No function (shutter open) 224-255 General dimming/speed: 0-255 dimming( 0-Black , 255- 100% ) speed from slow to fast /when running internal programs speed from slow to fast /when running gradient effect Instructions for installing the bar-door and frost filter: For this device, the bar door and the frost filter can be istalled separately or together.
-
Page 19: Cleaning And Maintenance
CLEANING AND MAINTENANCE We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents! There are no servicable parts inside the device. Maintenance and service operations are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts.
Need help?
Do you have a question about the WALLY 136 and is the answer not in the manual?
Questions and answers