Osd Information; Weak Signal; No Program; Invalid Signal - JVC I'Art LT-37X987 Service Manual

OSD Information

Weak Signal

This OSD warning appears when the digital channel that you have selected is too weak to
receive or no signal is being detected for that channel.

No Program

If the external input terminal you selected, or were watching is not receiving a signal, "NO
PROGRAM" appears on the television screen. It appears when that external input terminal
is not receiving a signal and you have the Noise Muting function OFF and you have a single
screen. It moves automatically every two seconds to prevent the screen from burn-in.
Note:
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off
functions that you set, are still active.

Invalid Signal

If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It
appears when the input is PC and it is a single screen.
74
Weak Signal
15