Chapter 7: Changing The Date And Time - Night Owl CS-ALARM-LCD-8GB User Manual

Chapter 7: Changing the Date and Time

1. Turn on the LCD screen.
2. Turn on your Video Alarm Clock.
3. To change the date and time on your Video Alarm Clock,
hold the "Play" button for 2 seconds. You will enter into
the "Adjust Date & Time" screen.
4. Keep in mind this Video Alarm Clock is set to Military
Time. Use the "Motion" button to switch between the
values which you would like to change. The selected
value will be highlighted blue.
Use the "Manual" button to increase the desired values of
5.
the date and time. Use the "Alarm" button to decrease the
desired values of the date and time.
Press the "Play" button once to save the date and time.
6.
When your Video Alarm Clock's battery is too low, the
time may reset to factory default. You will need to
change the time again if you want your recorded files to
have the correct recording time.
9