Keypad Tone - i-mate PDA2 User Manual

Keypad tone

You can change the tone you hear when entering a phone number on the keypad. If set to
Tones, the tone is heard continuously for as long as the number on the keypad is pressed.
If set to Beep, the tone is heard only for one or two seconds.
1. Tap the Keypad list, then select the option you want.
2. To prevent tones from being heard when entering a phone number, select Off.
Network
With network settings, you can view available networks, determine the order in which your
Pocket PC Phone accesses another network if the current one is unavailable, and specify
whether you want to change networks manually or automatically. The current network will
remain active until you change it, lose your signal, or change your SIM card.
The network currently in use will be listed at the top of the screen.
n
When your current network is unavailable, tap Select Network to select an alternate.
n
Services
The Services tabs are primarily used to set options for incoming calls, such as Call
Forwarding, Call Waiting, and Caller ID. To change service settings from the phone dial
screen, tap Tools > Options > the Services tab > select a service > Get Settings.
Feature
Call Barring
Blocks incoming and/or outgoing calls.
Caller ID Identifies caller by displaying their name and/or phone number.
Call Forwarding Forwards all or selected incoming calls to a different number.
Call Waiting Notifies you of an incoming call while you are on the phone.
Voice Mail/SMS Shows the correct numbers in the phone settings.
Pocket PC Phone User Manual
Function
75