Advertisement
Advertisement
Table of Contents
Related Manuals for MadBoy BONEHEAD-206
Summary of Contents for MadBoy BONEHEAD-206
- Page 1 BONEHEAD-206 6" POWERED SPEAKER SYSTEM USER MANUAL WWW.MADBOY-AUDIO.COM...
-
Page 2: Explanation Of Graphical Symbols
Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the Ventilation– The appliance should be cable ground shall be connected as close to the point of situated so its location does not interfere with its proper WWW.MADBOY-AUDIO.COM... -
Page 3: Before Getting Started
– STEREO RCA LOOP THROUGH (L/R) Before Getting Started Please check that the following items are included with your MadBoy BONEHEAD-206 Speaker system: - 2 BONEHEAD-206 Powered Speakers (1 with amplifier and 1 without) - 1 RCA to RCA-stereo cable... - Page 4 2. Connect the power cable to the AC input, on BONEHEAD-206 rear panel. (2) 3. When cable is inserted to AC input of the BONEHEAD-206, connect another end of the cable to AC-wall outlet. 4. After connecting all necessary cables, players etc. (see page 4) turn power on from power switch. (3) NOTICE! When connecting cables etc.
- Page 5 2. Connect the other end of the RCA cable to Line out on BONEHEAD-206 rear panel. NOTICE! When connecting BONEHEAD-206 to another device via line out, make sure power is turned off and volume is turned down (in both device ie. amplifier)! This is to avoid any unwanted noise/hazard.
- Page 6 WWW.MADBOY-AUDIO.COM...
Need help?
Do you have a question about the BONEHEAD-206 and is the answer not in the manual?
Questions and answers