Page 2
Your INALSA PTC Fan Heater has a lot of thoughtful features built in to make your living convenient. Please read these instructions carefully, so that you may get the best out of the power packed features in your INALSA PTC Fan Heater.
Main Body Base Tip Over Switch Technical Specification * Product PTC Fan Heater Model Fusion Wattage 1500 W Voltage 230V, 50Hz, AC Cord plug PVC cord with 3 pin, 16A, 250V plug * Due to continuous improvements in product, specifications are subject to change...
1. Read all instructions before using the fan heater. 2. Only connect the fan heater to a single-phase socket with a main voltage as specified on the rating plate. 3. Do not leave your home while the appliance is in function: ensure that the switch is in OFF(“O”) position and the thermostat is in minimum position.
2. During summer turn the knob (4) to fan position for only FAN mode. 3. Heating at reduced power: turn the knob(4)to setting 'I' (750W). 4. Heating at full power :turn the knob (4) to setting 'II' (1500W) 5. Switching off: turn the knob (4) to setting 'OFF' 6.