Connecting A Cable Tv Box - Microtek CL42HA User Manual

Connecting a Cable TV Box

You can watch cable TV programming after having subscribed to your local cable TV service. TV
programs can only be viewed when a cable TV box or multimedia module is connected to the LCD;
contact your local cable TV provider for more information on the services available in your area. When a
cable TV box is connected to the LCD, channels can be selected using the box, not the LCD.
A cable TV box should be connected to either the Antenna (Analog) port or to a video input port (Video
1 or Video 2). See the section below for a detailed description of connection options.
A. Antenna connection
1. Connect a coaxial antenna cable from the cable TV box's Antenna (Analog) output port to the
LCD's Antenna (Analog) input port.
2. Select channel 3 or channel 4, using the channel switching control on the cable TV box.
3. Tune the TV channel to the same channel as the cable TV box.
4. Select a channel to view, using the channel switching control on the cable TV box.
B. Video connection
1. Connect standard AV cables from the video/audio outputs on the cable box, to the video input port
(video 1 or video 2), and to the audio input ports on the LCD.
2. Plug the power cord into the power connector at the rear of the LCD, and then press the PWR1
(Red) button on the remote control or the POWER ( ) button on the LCD unit to turn the LCD on.
3. Press the TV/AV button on the remote control or the SOURCE button on the LCD unit to display a
list of available input sources.
4. Use the UP/DOWN buttons on the remote control to select the appropriate input source (Video 1 or
Video 2).
5. Select a channel to view, using the channel switching control on the cable TV box.
14
VGA AUDIO
A
B
Cable Box