Changing the
playback speed
The playback speed can be adjusted in
21 steps from the slow speed of 0.5 times
normal speed (50%) to the fast speed of
2 times normal speed (200%).
1
2
3
14
●
14
Press [
OK] during playback.
Press
or
to adjust the
playback speed.
Playback speed
•
: Each press of this button increases
the playback speed.
•
: Each press of this button reduces the
playback speed.
The playback speed can be adjusted in
10% steps for speeds faster than normal
speed, and 5% steps for speeds slower
than normal speed.
• Press [
STOP/RETURN] to return to 100%.
Press [
OK].
The setting value is confirmed.
Normal playback may not be possible
depending on the file.
A-B Repeat playback
Set a start point (A) and finish point (B) to
repeat playback between those points.
Press [ERASE/
1
] during
playback.
The start point (A) is
set and "
" (lighting)
and " " (blinking) are
displayed.
Press [ERASE/
2
] at the
finish point (B).
The indication changes
to "
" (lighting) and
A-B repeat playback
starts.
Cancelling A-B Repeat:
Press [ERASE/
] again. (A-B Repeat can
also be cancelled with [
or
.)
●
You cannot set A-B Repeat when the time
between the start point (A) and finish point
(B) is approx. 2 seconds or less.
●
If the file is played to the end while the start
point (A) is set, the end of the file is set as
the finish point (B) and A-B Repeat starts.
●
A range that spans across two files cannot
be set for A-B Repeat.
A-B Repeat indication
STOP/RETURN],