1. Manuals
  2. Brands
  3. On Point Audio Manuals
  4. Speaker System
  5. OPA-10 ACTIVE
  6. User manual

On Point Audio OPA-10 ACTIVE User Manual

Loudspeaker system
Hide thumbs
Table of Contents

Advertisement

Quick Links

On Point Audio, Inc.
OPA-10 ACTIVE USER MANUAL
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operation and maintenance instructions.
The lightening flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The On Point Audio OPA-10 Active was designed to provide very high performance,
high-quality sound reinforcement as well as very high output-to-size ratio. The OPA-10
Active was designed for use in portable and fixed installation indoor environments such
as night clubs, houses of worship, meeting halls and general live performance
applications. The OPA-10 Active features a compact yet incredibly rugged enclosure
design that provides very high acoustic output with excellent sight line characteristics,
portability and ease of use.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OPA-10 ACTIVE and is the answer not in the manual?

Questions and answers

Related Manuals for On Point Audio OPA-10 ACTIVE

Summary of Contents for On Point Audio OPA-10 ACTIVE

  • Page 1 The On Point Audio OPA-10 Active was designed to provide very high performance, high-quality sound reinforcement as well as very high output-to-size ratio. The OPA-10...

  • Page 2: Specifications

    Specifications Frequency Response: 65 Hz – 20,000 Hz Coverage Pattern: H X 40 V – fully rotatable Input/Thru Connections: 3 Pin XLR-type (Pin 2 +) Power: Peak - Total System: 2,000 Watts Continuous- Total System: 1,000 Watts Peak Low Frequency: 1,000 Watts Peak High Frequency: 1,000 Watts...
  • Page 3 290.0 [11.42] 564.5 [22.23] 249.8 [9.83] 290.0 [11.42] 370.0 [14.57] Read all of the instructions included in this manual Copies of this manual should be retained by the system’s installer AND end-user. This manual must be read and understood and ALL warnings must be followed. Follow all instructions to insure optimal product performance.

  • Page 4: Fcc Statement

    Part 15 of the FCC rules. Test data is available from On Point Audio. INTRODUCTION Thank you for purchasing the On Point Audio OPA-10 Active and for your support of our products. The OPA-10 Active will provide you with many years of high performance with proper use and care.

  • Page 5: Other Accessories

    OPA-10 Active. FEATURES AND APPLICATIONS The OPA-10 Active is a professional product and is designed to be used with a high- quality mixing console. The OPA-10 Active does not provide any additional, user- selectable, equalization or gain. Equalization and gain functions should be provided by the mixing console.

  • Page 6: Ac Mains Connection

    OPA-10 Active is in the OFF position. On/Off Switch The OPA-10 Active will operate on AC mains voltages of 115 volts to 230 volts. (The OPA-10 Active uses an internal “autoswitch” circuit) The required AC mains frequency is between 50 Hz and 60 Hz. The operating voltage is between 104VAC and 253VAC The OPA-10 Active uses a standard IEC-type AC mains connector system.
  • Page 7 (or other source output) are reduced or muted prior to applying power to the OPA-10 Active. NOTE: When power is applied to the OPA-10 Active and the unit is turned on, there is approximately a 5 to 15 second delay before the pilot light illuminates.
  • Page 8 Pilot Light NOTE: If the pilot light does not illuminate within 30 seconds, the unit may be in a FAULT CONDITION. If this occurs, the system should be returned to On Point Audio for evaluation. THERE ARE NO USER-SERVICABLE PARTS INSIDE. DO NOT REMOVE THE...
  • Page 9 RIGGING AND SUSPENSION OF THE OPA-10 Active The OPA-10 Active features 10 x M10 (metric) stainless steel rigging points. These rigging points enable the system to be suspended for temporary or permanent installations. There are three M10 points on the top of the enclosure, three on the bottom of the enclosure and two on each side.
  • Page 10 The OPA-10 Active may also be mounted to any high-quality loudspeaker stand with a standard 1.375 inch (35 mm) diameter mounting pole. The mounting pole MUST be located on a level surface that is capable of safely supporting the weight of both the loudspeaker stand and the OPA-10 Active.

  • Page 11: Distorted Sound

    All system gain should be set via the outboard mixing console. The mixing console should be capable of providing sufficient output levels to supply the necessary voltage levels to drive the OPA-10 Active to full power and still insure adequate headroom in the mixing console.
  • Page 12 The threshold is approximately -25dBV. 2. Verify that there is AC Mains voltage on the AC Mains input to the OPA-10 Active 3. If AC Mains voltage is present, verify that the OPA 10 Active’s fuse is not blown.

  • Page 13: Product Service

    PRODUCT SERVICE There are NO user-serviceable parts inside the OPA-10 Active’s amplifier. The OPA 10 Active’s amplifier module MUST be serviced by an company authorized by On Point Audio. Replacement of Components REPLACEMENT OF COMPONENTS MUST BE PERFORMED BY A QUALIFIED...

Table of Contents