Related Manuals for Hypertec PC Card 10/100 TX
Summary of Contents for Hypertec PC Card 10/100 TX
-
Page 1: User Guide
PC Card 10/100 TX HYNEP51001 USER GUIDE Information in this document is subject to change without notice. All rights reserved. All brand names are registered trademarks of their respective companies. - Page 2 HYPERTEC. HYPERTEC reserves the right to make modifications to the product without notification. Hypertec is a trademark and the Hypertec logo is a registered trademark of HYPERTEC. All other brand and product names included herein may be trademarks of the respective companies.
- Page 3 Features Dual-speed 10Mbps (10BASE-T) and 100Mbps (100BASE-TX) operation Automatic sensing and switching between 10/100Mbps operation Super low power consumption Full Duplex - Independent receive and transmit circuits allow for full duplex operation at both 10Mbps and 100Mbps, giving the adapter a maximum throughput of 200Mbps Platform independent - supports all PC Card, Type II compliant PCs Wide selection of software drivers to support all major network operating...
-
Page 4: Hardware Installation
2. Connect the media coupler to the HyperNet adapter 3. Attach the network cable The HyperNet PC Card 10/100 TX adapter is a Type 11 PC Card with a 68-pin connector, which is compatible with any Type 11 PCMCIA slot. If your computer has more than one slot, you may insert the adapter in any of them. - Page 5 Never disconnect the HyperNet PC Card by pulling on the cable. If at any time during installation you experience difficulties, please contact Hypertec Technical Support on +44 1488 686844 (01488 686844 in the UK).
- Page 6 Length - 3.37" (85 mm) Width - 2.13" (54 mm) Thickness - 0.197" (5 mm) Power Consumption: 100BASE-TX: 260mA 10BASE-T : 190mA Operating Temperature: 0°-50°C Operating Humidity: 0% - 90% non-condensing Certifications: FCC Part 15, Subpart B class A Ethernet Protocols: IEEE 802.3U (Fast Ethernet, 100BASE-TX) IEEE 802.3 (Ethernet, 10BASE-T) Data Transfer Rate:...
- Page 7 The liability of Hypertec is limited to the repair or replacement of the product with a functionally equivalent or better product. Hypertec is not liable for any...
Need help?
Do you have a question about the PC Card 10/100 TX and is the answer not in the manual?
Questions and answers