Summary of Contents for DesignHouse Keypad Lock
- Page 1 Keypad Lock Installation Instructions WWW.TODA YSDESIGNHOUSE.COM Customer Service:1-800-558-8700...
- Page 2 2. Remove Interior Cover Plate screws (4) to expose Battery Box. 3. Unscrew and remove two mounting screws. 4. Interior and Exterior can be removed from the styrofoam packaging. 5. Proceed with installation of Keypad Lock. Keypad Deadbolt Entry Page.2...
-
Page 3: Installation Instructions
EYPAD Cover loop Interior cover plate Interior cover plate Interior panel Interior panel Installation Instructions power wire 1.Use template [provided] to prepare door. power wire 4*35mm screw 4*35mm screw Spindle Spindle Fig. B Keypad Lever Entry Keypad Deadbolt Entry Exterior Panel Exterior Panel Packing List Interior... - Page 4 EYPAD 2. Drill and prepare the doorframe for the Plastic Insert and Strike Plate making 9. Feed Cover Loop and plastic gasket ring over the interior handle. Screw Cover Ring sure the holes are level and a direct match for the door lock drilling (See Fig. A). tightly to secure the interior assembly.(Lever Entry Only) 1-3/4 Attach the Interior Cover onto the Interior Panel and fix them with two (3x10mm)
- Page 5 In case of loss of user records or other need to RESET all passwords Dismantle the Keypad Lock assembly. Press the RESET button on the inside of the Exterior Panel. Lock will return to factory set Master Code. Change to new Master Code. Program all new User Numbers and User Passwords as listed above.
Need help?
Do you have a question about the Keypad Lock and is the answer not in the manual?
Questions and answers