Table of Contents
Advertisement
usage) to set whether to keep Wi-Fi connected when the tablet is in sleep mode and when to
keep Wi-Fi connected. If you tap Always, the Wi-Fi network is always connected even when
the tablet is in sleep mode.
Mobile networks
1
Use a 3G USB Dongle to connect to the tablet when the tablet is on. The tablet automatically
identifies the 3G mobile device.
2
Use the tablet after the 3G signaling icon is displayed on the status bar.
Tips: There are various 3G network card brands. To ensure better network access experience, you
are advised to test a 3G card before buying it.
Enable the 3G network
The 3G network is enabled by default. To disable the 3G network, perform the following steps:
1
Go to Settings > WIRELESS & NETWORKS and tap More.
2
Tab Mobile networks and deselect Data enabled. The 3G network is disabled.
View 3G data traffic
Go to Settings > WIRELESS & NETWORKS and tap Data usage. You can view details about the
3G card traffic.
Ethernet
1.
Go to Settings > WIRELESS & NETWORKS, tap More, tap Ethernet, and select Use Ethernet.
2.
After the network cable is properly connected, the corresponding icon indicating that the
network is successfully connected is displayed on the status bar.
Tips: When the network is connected, you can tap Advanced to set the network.
User Manual
Advertisement
Table of Contents
