Setting The Functions; Network Standby On; Surround Sound Expansion; Tv Soundconnect - Samsung HW-H750 User Manual

TV SoundConnect
You can enjoy TV sound through your Sound bar
when it is connected to a Samsung TV that
supports the TV SoundConnect function .
((c
, -
~
.. _ - - • v
.....
. .
. .
.
. . .
. . .
. . .
:
·.·
• •
•
1.
Turn on the TV and Sound bar.
• Set the "Add New Device" menu of the TV
to "On" .
2.
Press the (
r:·.)
button on the main unit's front
panel or the
-:::J
(SOURCE)
button on the
remote control to select the
TV
mode.
3.
On the TV, a message asking whether to
enable TV SoundConnect function .
"[Samsung]
Soundbar"
is displayed on the TV screen .
4.
Select
<Yes>
to finish connecting the TV and
Sound bar by TV remote control.
• Switching the Soundbar's mode from TV to
another mode automatically terminates TV
SoundConnect.
• To connect the Sound bar to another TV, the
existing connection must be terminated.
• Terminate the connection to the existing TV,
and then press the ..,. .. button on the remote
control for 5 seconds to connect to another TV.
()='
See page 20 of the user manual for more
information about TV Sound Connect.
Surround Sound Expansion (Surr.Sound)
Press the
Surr.Sound
button
on the remote to add
depth and spaciousness to
the sound .
When you select
SURROUND SOUND AUTO:
If the sound source has
more than 2 channels, SURROUND SOUND ON
turns on automatically. If the sound source has
2 channels (stereo) or less, SURROUND SOUND
OFF is selected automatically.
6
Network Standby On
This function turns on the Soundbar
automatically when the smart device tries to
connect to the Sound bar
1.
Connect the Smart dev1ce to your Soundbar.
2.
Turn the Network Standby On function on
by pressing the
~+I
button on the Soundbar
remote for more than 5 seconds. You can
turn the function off by pressing the
~+I
button again for more than 5 seconds .
• Available only if the Soundbar is listed among
the Smart device's pa1red devices. (The Smart
device and the Soundbar must have been
previously paired at least once.)
See page 22 of the user manual for more
mformat1on about Network Standby On
function.
Input mode
:·~
i] ]
c}
~
:. a
<==>
~
Press the (
r:·. )
button on the mam umt's front
panel or the
-:::J
(SOURCE)
button on the remote
control to select the mode you want.
Input mode Display
Optical Digital input D.IN
AUX input
AUX
HDMI input HOM I
BLUETOOTH mode
BT
TV mode TV
USB mode
USB
The unit turns off automatically in the following
Situations: ·
• D.IN/HDMI/BT!TV/USB/ARC Mode
- If there is no audio signal for 15 minutes.
• AUX Mode
- If there is no KEY mput for 8 hours when
the AUX cable is connected.
- If the AUX cable is disconnected for 15
minutes.