Launchkey MIDI controller keyboard User Manual page 11

English
8 x rotary controls, providing further DAW/MIDI control.
6
Transport controls - these provide remote control facilities for your DAW, but also have
7
specific functions when Launchkey is used with the iPad apps.
16 x velocity-sensitive launch pads. These can be used to trigger sounds (e.g., drums) in
8
your music software and provide other functions in some DAWs and the Novation iPad apps.
2 x round buttons. These can be used for custom functions in the iOS software, or in your
9
DAW.
3 x InControl buttons; these switch the operating mode of the sliders, rotary controls and
3
10
launch pads to be either DAW controllers or standard MIDI CC controllers.
LED display. Shows the value of the MIDI parameter being transmitted by the control you're
11
currently using.
Octave + / – buttons – shift the keyboard 'up' or 'down' in octave steps. Pressing the two
12
buttons together lets you transpose the keyboard in semitone increments. The number of
octaves over which the keyboard can be shifted varies with Launchkey model; the smaller
models have a greater shift range.
Track I / H buttons – use these to change tracks in your music software or to switch
13
between Novation iPad apps (I switches to the Launchkey app, H to the Launchpad app).
Pressing both buttons together lets you change the MIDI channel on which Launchkey will
transmit and receive MIDI data.
1 Launchkey 49 and 61 only. Launchkey 25 has one assignable slider.
2 Launchkey 49 and 61 only. There are no buttons on Launchkey 25.
3 Launchkey 49 and 61 only. Launchkey 25 has two InControl buttons.
11