Page 2
Introduction: Thank you for your interest at our Bluetooth car kit. This car kit is a wireless Bluetooth kit based on the Bluetooth technology that allows you to making and talking calls without touching your mobile phone. Read this user guide carefully before using the car kit .Read also the user guide for your phone, which provides important safety and maintenance information.
Page 3
Get started Overview 1--MUTE 2--LED display 3-- MIC input 4--Multi-function Button (MFB) 5--Volume -button 6--Volume +button 7--Mini USB 5 PIN for the charging socket 8--Speaker Before you start using the car kit, you must charge the battery and pair the car kit with a compatible mobile phone.
Page 4
Charger This car kit is intended to use with the car charger that is included in the package. Charge the battery This device has a Rechargeable Lithium Polymer Battery 3.7V, 820mAH battery. 1. Connect the car kit to the car charger. The red indicator light is displayed during charging.
Page 5
Bluetooth devices. See the user guide of your phone for instructions. 4. Select the car kit (MT-2000) from the list of found devices. 5. Enter the pass code “0000” to pair and connect the car kit to your phone.
Page 6
Basic use Call handling To make a call, use your phone in the normal way when the car kit is connected to your phone. And the blue LED will flash during the call. To answer a call, press the “MFB” and the blue LED will flash during the call.
Page 7
LED indicator status: Switch on: the blue LED flash five times. Standby state: Blue LED flashes once every 3 second, Connecting status: Blue LED flashes once every 3 second Making and answering a Call: Blue LED flashes Call: Blue lights flashing fast Low battery warning: Red LED always on Switch off: red LED flashes five times.
Page 8
- Standby time : about 600 hours - Dimensions: 117.5x47x15.3mm - Pack included : MT-2000 Speakerphone,Battery,Car Charger, User Manual, FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received;...
Page 9
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.
Need help?
Do you have a question about the MT-2000 and is the answer not in the manual?
Questions and answers