Control - Schaefer WayCool 1/3HP - Series User Manual

Controls
Figure WC-1/3HP.08 - WayCool Control Switch
®
The WayCool WC-1/3HP control switch is mounted on the outside of one frame leg (see cover fig).
®
It has the following positions:
OFF - Power is off to the blower motor and the pump motor.
LOW VENT - The blower runs at low speed and the pump is OFF.
HIGH VENT - The blower runs at high speed and the pump is OFF. Use this setting to quickly dry the cooling pads for removal and
cleaning.
LOW COOL - The blower runs at low speed and the pump is on. Use this setting for low cooling loads.
HIGH COOL - The blower runs at high speed and the pump is on. Use this setting for maximum cooling.
PUMP ONLY - Pump is on and the blower is OFF. Use this setting during startup to first saturate the cooling pads, then switch to LOW
COOL or HIGH COOL to begin cooling.
10