Download Print this page

RBH Sound SS4-50 Installation & Operation Manual

4-channel and 6-channel impedance matching speaker selectors

Advertisement

Quick Links

Warranty
RBH Sound ("RBH") warrants the SS4-50 / SS6-50 to be free from defects in materials and workmanship (subject
to the terms set forth below) for a period of ten (10) years from the date of purchase. During the Warranty
period, RBH will repair or replace (at RBH's option) this product or any defective parts (excluding electronics
and amplifiers).
To obtain Warranty service, please contact the RBH authorized dealer from which you purchased this product.
If your dealer is not equipped to perform the repair of your RBH product, it can be returned, freight prepaid, to
RBH for repair. Please call RBH at 800-543-2205 for instructions. You will need to ship this product in either its
original packaging or packaging affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence this product is within the
Warranty period, must be presented or included to obtain Warranty service.
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product
or (b) this product was not purchased from an RBH authorized dealer. You may call 800-543-2205 to confirm that
you have an unaltered serial number and/or you purchased from an RBH authorized dealer.
This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence, acts of God,
accident, commercial use or modification of, or to any part of, the product. This Warranty does not cover
damage due to improper operation, maintenance or installation, or attempted repair by anyone other than RBH
or a RBH dealer which is authorized to do RBH warranty work. Any unauthorized repairs will void this Warranty.
This Warranty does not cover product sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE
CONSUMER. RBH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING
BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
Some states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties
so the above exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have
other rights, which vary from state to state.
Redefining the way
you experience sound.
382 Marshall Way • Layton, Utah • USA • 84041
Toll-free: (800) 543-2205 • Fax: (801) 543-3300
It is RBH policy to continuously incorporate improvements into our products; all specifications are subject to change without notice.
Copyright © 2006, RBH Sound. All Rights Reserved.
RBH Sound
www.rbhsound.com
Redefining the way
you experience sound.
SS4-50
SS6-50
4-Channel and 6-Channel
Impedance Matching Speaker Selectors
I n s t a l l a t i o n
&
O p e r a t i o n
M a n u a l

Advertisement

loading
Need help?

Need help?

Do you have a question about the SS4-50 and is the answer not in the manual?

Questions and answers

Summary of Contents for RBH Sound SS4-50

  • Page 1 Warranty RBH Sound (“RBH”) warrants the SS4-50 / SS6-50 to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of ten (10) years from the date of purchase. During the Warranty period, RBH will repair or replace (at RBH’s option) this product or any defective parts (excluding electronics...
  • Page 2 Your speaker This system uses one stereo receiver/amplifier, one SS4-50 and four pairs of speakers: two remote pairs selector is the result of many years of research and development dedicated to producing high quality using RBH volume controls and two local pairs wired directly to the SS4-50.
  • Page 3 The SS6-50 is a resistor-based, impedance-matching* speaker selector for connecting up to six pairs Installation Instructions of 4 Ohms to 8 Ohms speakers to a stereo receiver or amplifier. All features are the same as the SS4-50. Refer to the above SS4-50 introduction for more details.
  • Page 4 You will need a total of 4 conductors (two sets of two individual wires) from your amplifier to the SS4-50 / SS6-50 input, and 2 conductors (one set of two individual wires) from each left and right output to each speaker location. Another option is to use...

This manual is also suitable for:

Ss6-50Ss8-50Ss8-200