Inspection, Maintenance, And Cleaning; Please Read The Following Carefully - Drill Master 90798 Operating Instructions Manual

INSPECTION, MAINTENANCE, AND CLEANING

1. WARNING! Always turn the Trigger Switch (21) to its "OFF" position,
and unplug the Charger (48) from its electrical outlet before performing any
inspection, maintenance, or cleaning.
2. BEFORE EACH USE, inspect the general condition of the Impact Wrench.
Check for misalignment or binding of moving parts, cracked or broken parts,
leaking Battery, damaged Charger wiring, chipped or broken sockets, and any
other condition that may affect its safe operation. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Do not use damaged equipment.
3. DAILY: With a clean cloth, remove all dirt, grease, and oil from the Impact Wrench.
Do not immerse the Impact Wrench in any liquids.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST
AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEI-
THER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION
OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO
REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS RE-
PLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNI-
CIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABIL-
ITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLA-
TION OF REPLACEMENT PARTS THERETO.
SKU 90798 PAGE 13