Page 1
Bluetooth USB Serial Adaptor HANTZ + PARTNER The Upgrade Company! www.hantz.com Model name: BM2001 User Manual ver 3.2 ABOUT BM2001 Class 1 / USB Interfac e DIP switch is available for a second setting 4dBi Dipole Antenna provided BTNetworks Co., LTD 2005 08.24 Ver 3.0...
Contents 1. About BM2001 (Bluetooth USB Serial Adaptor)......3 2. Comparison with General Bluetooth USB dongle ..... 5 3. External View ................6 4. Range information with External Antennas ....... 7 5. Specification & Power Consumption.......... 7 6. Description on DIP Switch ............8 6.1 Function Selection Switch ................
- Set the Role as Master or Slave - Select Mode: DIP-Switch Configuration mode or PC configuration mode BM2001 does not required external power supply as it gets power from USB port. <Fig.1.1 BM2001 with default Dipole (4dBi) antenna & DIP switch>...
Page 4
Configuartion by DIP switch or by PC software. Users may do configuration either via DIP switch on the backside of BM2001, or via AT commands in Hyperterminal in PCs. By DIP switch By PC software Device Name = BTNetworks PIN Code = BTWIN...
Bluetooth Profile As Bluetooth USB serial adaptor (BM2001) has USB-to-Serial conversion feature, users may simply plug in to the USB port of the machine with USB interface. BM2001 does not require application software like WIDCOMM stack. <Figure 2.1 Bluetooth communication by BM2001>...
Range information with External Antennas 100 m Blueooth Communication BM2001 BM2001 Dipole Antenna Antenna gain : 4dB Dipole Antenna 100 - 300 m Antenna gain : 4dB Blueooth Communication BM2001 BM2001 Dipole Antenna Patch Antenna Antenna gain : 4dB Antenna gain : 8dB...
Power Consumption Mode Current Remark Standby 20 ㎃ Test Environment Device Searching 73 ㎃ - Baud rate is 9600 bps Pairing 55 ㎃ - Input Voltage is 5V. Power consumption depends on Before Connection 73 ㎃ communication speed and the environment. After Connection 50 - 55 ㎃...
- To use PC software: s/w should be down. 6.1.1 Selection of Role (Master / Slave) In order to communicate between two BM2001, one should be a Master and another should be a Slave. You may set the role with pin#3 of the function select switch.
SLAVE. 6.1.2 Selection of Configuration Method BM2001 provides two kinds of configuration methods. One way is using DIP switch on the back side of BM2001, and the other way is via HyperTemrinal in PC. Users may choose one as prefer.
Move Up the pin#4 of the Function Select Switch, and the Mode is DIP Switch mode. ii) PC Configuration Mode Move down the pin#4 of the Function Select Switch, and the mode is PC Configuration mode. 6.2 Baud Rate Switch You may set the baud rate with this DIP Switch.
Setting the baud rate with the Baud Rate Switch. Set the Baud Rate Switch 1200 bps 2400 bps 4800 bps 9600 bps 19200 bps 38400 bps 57600 bps 115200 bps ** Caution ** - Pin #1 of the Baud Rate Switch is no-working pin. - Pin #4 of the Function Select Switch must be up (DIP Switch Mode).
7.1 LED indication - Power indication LED / Status indication LED You can find the status of BM2001 with Red and Green LED indicator. Status Description Power LED Power ON Red LED is On (Stable) Connecting Green LED is flashing twice per second.
Installation of BM2001 device driver 8.1 Installation of device driver 8.1.1 Windows 98 & Windows 2000 1) Attach BM2001 to USB port of PC and turn on the BM2001. 2) The pop up window will appear hardware device. 3) Click Next button 4) Select “Search for a...
Page 15
Select “CD-ROM drivers” and click Next button. 6) Windows found a driver for BM2001. Click Next button. First driver Installing procedure finished. Click Finish button. * You should do driver installing procedure one more time...
Page 16
8) You may see new pop up window. Click Next button. Select “Search for a suitable driver for device [recommended]” click Next button. 5) Select “CD-ROM drivers” and click Next button.
Page 17
Click Finish button. If you have any troubles installiong the driver, you may try another way. Here is another way you may follow. 1) Attached BM2001 to USB port of PC and turn on the BM2001. 2)”Found new hardware device”...
Page 18
Select “Search for a suitable driver for my device [recommended]” and click Next button. 5) Select “Specify a location” and click Next button. 6) Move to CD-ROM’s BTWIN BM2001 USB Adapter install driver. 7) Select “Btbus” file and click “Open” button.
The device driver install procedures are separated two steps. The first step is making the driver folder in the Windows. [1] Move to “BTWIN BM2001 USB Adapter driver “ folder on CD be provided, and you can see below window.
Page 20
[4] Ok, first step has finished. Open the C drive of your computer, and you can find “BTWIN” folder. [5] Now, the installing procedure will begin from here for the BM2001’s device driver. Turn on the power switch of BM2001.
Page 21
[6] The windows shall find the new device and you will see the pop-up window. [7] Select “Install the software automatically [Recommended]” and press “Next” button. [8] If your OS is a Windows XP, you will see the below windows. But you can ignore that massage, click “Continue Anyway”...
Page 22
[11] Select “Install the software automatically [Recommended]” press “Next” button. [12] If your OS is a Windows XP, you will see the below windows. But you can ignore that massage, click “Continue Anyway” button.
[13] Click “Finish” button, window will disappear. All installations have been finished. 8.2 Uninstallation of device driver (Windows 98, Windows 2000 and Windows XP) 1) Move to [My computer] [Control Panel] [Add/Remove programs] You may see “BTWIN USB Adapter”. Select that and click “Change/Remove” 4) Click “Yes”...
5) Click “OK” button. 8.3 Setting-up COM Port for BM2001 8.3.1 Windows 98 [1] Move to [My computer] [Control Panel] [System] [Hardware] [Device Manager] [2] Click Port, and you may see “BTWIN BM2001 USB Adapter” [3] Double click BM2001 to see...
[3] Select the Resources Tab. [4] If you want to change COM port for BM2001, you should change the Setting based on. [5] Please refer to below table. COM Port No Input / Output Range COM port Number is assigned by Input / Output Range.
1) If there are two BM2001s. One should be a Master and opposite side should be a Slave. * BM2001 is set either master or slave at factory. 2) Mode selection should be DIP-Switch Configuration mode. 3) Baud rate is 9600 bps...
9.1.1 Communication Test at 9600bps (default setting) Ex.) Part Description Equipment PC: 2 ea BM2001: 2 ea PC is power on and OS is the Windows. Test Environment Use USB port of each PC. Default User Select Part (Before change)
Page 29
Follow these procedures. [1] Attach BM2001 to USB port of each PC. [2] Turn on the power switch. ♦ Whenever turn on the power switch, BM2001will start working. [3] Check on the power LED color is red. ♦ It means B2001 is supplied power stable.
After change, please try with HyperTerminal to confirm the successful data communication with changed buad rate. ♦ BM2001 should be either master or slave. If one is a master, another should be a slave. I) Set as a MASTER Function Select Switch...
Page 31
ii) Set as a SLAVE Function Select Switch Baud Rate Switch Setting Role: Slave Bps: 115200 bps Mode: DIP Switch Configuration Mode After the change of DIP switch to use 115.2Kbps, please test with Hyperteminal with Port settings with new baud rate as in below.
9.2 Configuration By PC Software 9.2.1 Pre-setting You should below procedures in order to use the PC Configuration mode before turn on the BM2001. [1] In order to use PC Configuration Mode, you need the serial communication software. Here we explain the usage scenario with HyperTerminal of Windows.
Page 33
ASCII setup mode. Check the “Echo typed characters locally” box in the ASCII Sending. [4] Afterward above set up, turn on the BM2001 and then click connect button. It will appear the message like left picture then it will...
TOP menu to configure. [6] If you do not press the enter key within 5 seconds, BM2001 will try to communicate at default setting. [7] If you need more detail information for PC Configuration Mode, refer below documents.
Page 35
5) If the entered character is wrong, “Retry > “ message will be displayed. 6) You can enter the character until maximum 12 characters. If the entered characters exceed than 12 characters, it will display “Overflow buffer” message. And then it will display “Retry >...
Page 36
Explanation on menu of the PC configuration interface [1] Device Name: Bluetooth device’s name [1-1] You can change the device name within 12 characters. [1-2] Afterward input the name then press the enter key. Appear “Change Complete!!” message and then move to TOP MENU. The device name is changed from BTNetworks to BTtest.
Page 37
[2-1] Authentication [2-1-1] User may set to request the authentication procedure. [2-1-2] When it is disable, the encryption feature is disable too. [2-1-3] The default setting is enable. [2-2] Pin Code [2-2-1] It is like a password. [2-2-2] To connect between two devices, they have to have a same pin code. [2-2-3] You can enter the pin code within 12 characters.
Page 38
[3] Local BD Address: [3-1] This is a MAC address of Bluetooth Device. It is fixed parameter. You can’t change [3-2] If you choice this menu, “No change local BD address” message will be displayed and then move to Top menu automatically. [4] Remote BD Address [4-1] This is the latest paired bluetooth device address.
Page 39
[4-3] When you want to delete the Remote BD address, input twelve zeros “000000000000” If you delete the Remote BD address, it is able to connect the first bluetooth device has same PIN code in MODE1. [4-4] BM1001 must have a Remote BD address in MODE3. [5] Role [5-1] Bluetooth device has to be an either master or slave.
Page 40
* You can see the changed Role. [6] Connection Mode There are three connection modes. You may select connection mode. 1) Select menu 5 at TOP MENU. 2) Choice the mode. And press the enter key. 3) You can see the changed mode.
Page 41
MODE 1 In this mode, BM2001 always connect the latest paired bluetooth device. If BM2001 has not the Remote BD address, try to connect the first bluetooth device is searched. At this time, two bluetooth devices must have same PIN code.
Page 42
[9] RS-232 (Parity Bit) Parity Bit is NONE, ODD and EVEN. [10] RS-232 (Flow control) BM2001 supports Hardware Flow control. Default setting is OFF.
If you want to connect the new bluetooth device, use this mode. Using method [1] Turn off BM2001 and move down the pin#4 of the function select switch. Then BM2001 will be a PC configuration Mode. [2] Run the Hyperterminal program of the windows. Refter to “PC Configuration Mode”.
Page 44
In Master Case [11] You can see the below picture. - BM2001 will find the bluetooth devices with same PIN code. - The searching will be kept on until look for 7 slaves. - Some keys have a function while searching.
Page 45
[1] Turn off BM2001. And move down the pin#4 of the function switch to be PC configuration Mode. [2] Turn on BM2001. And change the connection mode as MODE1 at the main menu. [3] Turn on BM2001. And move up the pin#4 of the function switch to be DIP Switch Mode.
Page 46
[5] Select No.3 Remote BD address at the main menu. [6] Input the Remote device’s address. [7] Input “x”, and then BM2001 will try to connect with new device what you want to connect. [8]Wait until “Connection Ok” message will be displayed.