Advertisement
Introduction:
Thank you for purchasing the TVA-1 NTSC TV converter. When using the TVA-1 with the AR5000 or
AR5000+3 communications receiver, the TVA-1 will add the ability to receive broadcast television signals
(NTSC) and allow monitoring video feeds from a variety of sources including public safety agencies, aircraft,
Amateur Radio FSTV, news media video and more.
(Ability to monitor varies with location and antenna system in use.)
Features:
Compact size (3-3/4 (W) x 1-1/4 (H) x 2-3/4 (D), projections excluded) and light weight (approximately
4.2 oz)
10.7 MHz IF input from receiver, Line output and video output
Simple operation
180 days limited warranty
Package Contents:
One TVA-1 TV converter
One BNC-BNC patch cable
One owner's manual (this booklet)
One 120 V AC adapter
System Requirements:
AOR AR5000 or AR5000+3 communications receiver or equivalent (with 10.7 MHz IF output, 10 MHz
Bandwidth)
Receiver antenna
External 12 VDC adapter, included)
2 shielded cables with RCA-type plugs at each end (not included)
NTSC monitor (not included)
Audio amplifier and speaker (optional)
AR5000 setup
1. Push the FUNC key. The FUNC icon appears on the top left corner of the LCD.
2. Push the KHz/CONFIG key.
3. Push the UP key twice to get EXT – IF OFF on the LCD.
4. Rotate the small dial to change OFF to 1 on the LCD.
5. Push the MHz/ENT key.
6. Push the FUNC key again.
7. Push the 3/IF BW key.
8. Rotate the small dial to get 220 KHz on the LCD.
9. Push the MHz/ENT key.
Advertisement
