Page 1
Wireless TV Remote #1521 USER’S GUIDE 385 Warburton Avenue For Technical Support: Call our Technical Service Department Hastings-on-Hudson, NY 10706 Monday through Friday, 9 a.m. to 5 p.m. (EST) Tel. 914.478.0960 / Fax 914.478.7030 1-800-TEC-TOYS or 1-800-832-8697 www.enablingdevices.com customer_support@enablingdevices.com...
Page 2
Perfect for viewers with impaired motor coordination! Our oversized TV remote control is perfect for viewers with impaired motor coordination. The wireless Switch Use: remote features a large striking area with 2" push buttons. The buttons are 7. You can plug up to 5 separate switches to control the same functions as the clearly labeled with words and symbols for Channel, Sound and On/Off large buttons;...
WALRB4P manual booklet 5/2/06 3:16 PM Page 3 INTRODUCTION FEATURES AND FUNCTIONS The One For All 4 Device Universal Remote Control (URC-4220) is Use the illustration below to locate features on the One For All 4 Device designed to remotely operate up to four home entertainment devices. It Universal Remote Control (URC-4220) and then study the Key Charts (on also features intuitive and easy-to-use keys for instant control of DVD and the next two pages) to learn how they function.
WALRB4P manual booklet 5/2/06 3:16 PM Page 5 Key Charts Use REW, PLAY, FWD, PAUSE,or STOP to control your VCR, PVR (or DVR), or DVD player. When the LED (red light) blinks, the remote control is For a DVD player, use SKIP F. or SKIP R. to view the next working and (after programming) is sending signals.
WALRB4P manual booklet 5/2/06 3:16 PM Page 7 INSTALLING BATTERIES PROGRAMMING DEVICE CONTROL The One For All 4 Device Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable box, and an RCA VCR. To control devices other than the default brands, per- form the following steps;...
WALRB4P manual booklet 5/2/06 3:16 PM Page 9 SEARCHING FOR YOUR CODE Repeat step 4 (on the previous page) three more times for remaining digits. Use for the second digit, for the third If your device does not respond to the remote control after trying all codes digit, and for the fourth digit.Write down the code dig- listed for your brand, or if your brand is not listed at all, try searching for...
WALRB4P manual booklet 5/2/06 3:16 PM Page 11 PROGRAMMING A MASTER POWER MACRO (continued) Press once. • If Favorite Channel Scan has been set up,scanning of Clearing The Master Power Macro favorite channels will start with up to 100 channel changes or until stopped by pressing any key.
WALRB4P manual booklet 5/2/06 3:16 PM Page 13 CHANGING VOLUME LOCK The One For All 4 Device Universal Remote Control is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a device’s vol- ume will be locked to one mode (e.g., to control TV volume in all other Volume will again be independently controlled according modes).After that, if desired, you can perform Individual Volume Unlock on a...
WALRB4P manual booklet 5/2/06 3:16 PM Page 15 TROUBLESHOOTING INSTRUCTIONS TO THE USER This equipment has been tested and found to comply with the limits for a class PROBLEM: LED (red light) does not blink when you press a key. B digital device, pursuant to part 15 of the FCC Rules.
Page 20
OFA USA View ALL Page 9 of 12 TV VCR Combo Colt 0072 TV VCR Combo Emerson 0002 TV VCR Combo Funai 0000 TV VCR Combo 0240 TV VCR Combo Harley Davidson 0000 TV VCR Combo Hitachi 0000 TV VCR Combo Lloyd's 0000 TV VCR Combo...
Need help?
Do you have a question about the 1521 and is the answer not in the manual?
Questions and answers