Table of Contents
Advertisement
path of least resistance for electric
current to reduce the risk of electric
shock. This compressor is equipped
with an electric cord having an
equipment-grounding conductor and
a grounding plug. The plug must be
plugged into a matching outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
2.
Do not modify the plug provided –
if it will not fit the outlet, have the
proper outlet installed by a qualified
electrician.
3.
Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. The
conductor with insulation having
an outer surface that is green with
or without yellow stripes is the
equipment-grounding conductor. If
repair or replacement of the electric
cord or plug is necessary, do not
connect the equipment-grounding
conductor to a live terminal.
4.
Check with a qualified electrician or
service personnel if the grounding
instructions are not completely
understood, or if in doubt as to
whether the compressor is properly
grounded.
5.
Use only 3-wire extension cords that
have 3-prong grounding plugs and
3-pole receptacles that accept the
compressor's plug.
6.
Repair or replace damaged or worn
cord immediately.
SKU 68064
For technical questions, please call 1-800-444-3353.
Grounding
Pin
120 V~ 3-Prong Plug and Outlet
(for up to 120 V~ and up to 15.5 A)
7.
This compressor is intended for use
on a circuit that has an outlet that
looks like the one illustrated above
in 120 V~ 3-Prong Plug and Outlet.
The compressor has a grounding
plug that looks like the plug illustrated
above in 120 V~ 3-Prong Plug and
Outlet.
8.
The outlet must be properly installed
and grounded in accordance with all
codes and ordinances.
9.
Do not use an adapter to connect this
compressor to a different outlet.
Symbology
Canadian Standards Association
V~
Volts Alternating Current
A
Amperes
No Load Revolutions per Minute
n 0 xxxx/min.
(RPM)
Page 7
Advertisement
Table of Contents
