Special Product Features - Phase Technology PC-1.5 Owner's Manual & Installation Instructions

Left
Front
Left
Surround

SPECIAL PRODUCT FEATURES

Adjusting Variable-Axis, Soft-Dome Tweeters
Some Phase Technology speakers feature the company's acclaimed variable-axis soft-dome tweeter (refer to
the model specifications on page 8 of this manual) offering even greater latitude in selecting speaker loca-
tions and listening positions.
This revolutionary tweeter can be adjusted by hand to direct the high frequencies towards a specific listen-
ing area for optimal tonal balance and channel separation. This enables owners of these Phase Technology
models to place the speakers where they look or fit best and then aim the tweeter for best effect.
When adjusting these units, be careful to press on the outer rims only, avoiding contact with the center, or
soft dome, of the speaker. A series of adjustments may be necessary to achieve the ideal clarity and smooth-
ness of the high frequencies that the variable-axis soft-dome tweeter was designed to present.
Bi-Wired Connections
Some Phase Technology premium audiophile speakers are equipped for be-wiring, with four speaker termi-
nals instead of two. This may enhance speaker performance by using an additional pair of speaker cables.
In order to bi-wire these speakers, remove the gold-plated strips between the speaker terminals and con-
nect two cables between your amplifier's positive output terminal and the two positive (red) terminals on the
speaker. Then connect the other two cables between the amp's negative output terminal and the two nega-
tive (black) terminals on the speakers.
If you chose not to bi-wire your speakers, do not remove the metal strips between the speaker terminals.
Connect each cable in the standard manner, with one cable each between the positive and negative speaker
terminals and your amplifier.
Center Speaker
Left Right Center
Front Front Channel
Ampli er Panel
SUB OUT
Left Right
Surr. Surr.
Right
Front
Subwoofer
Line Input
Right
Surround