Viewing stored Check Control
messages
1.
Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the words "CHECK CONTROL".
Press button 2.
2.
"CHECK OK" appears if there are no Check
Control messages.
If a Check Control message has been
stored, the corresponding lamp comes on.
3.
Push button 1 to check for other messages.
4.
Press button 2.
The display again shows the outside tem-
perature and the time.
Online Edition for Part no. 01 41 0 014 956 - © 02/08 BMW AG
61