UTStarcom UT-300R2U User Manual page 28

3. Click the "Next" button, make sure that the settings below
match the settings provided by your ISP., see the following:
Click on the "Save/Reboot" button, save your configurations.
Note:
If you select Dial-UP link, after configuring your ADSL MODEM,
please install the third-party dial up program to access Internet
(For example: Ethernet 300/Ethernet 500/WinPoet). If your
system is WinXP, you can use its own Internet access program
without any other additional dialer.
Modem Parameters Setting 22