Ultimate Plate 2JCBP371WBL Instruction Manual

Ultimate Plate 2JCBP371WBL Instruction Manual

Advertisement

Quick Links

371
INSTRUCTION MANUAL
2JCBP371WBL
Model:

IMPORTANT:

PLEASE NOTE: WHEN YOU OPEN THE CARTON, CAREFULLY CHECK THE UNIT AND MAKE SURE THERE IS NO DAMAGE. IF YOU HAVE ANY
PROBLEMS WITH ASSEMBLING THE UNIT, WITH HOW THE VARIOUS FUNCTIONS WORK OR WITH DAMAGE OR MISSING PARTS, PLEASE
CALL 1-800-459-4409 (8:30 AM - 5:00 PM EST) IMMEDIATELY FOR SERVICE.
NOTE:
DO NOT RETURN UNIT TO THE STORE BEFORE CALLING THE TOLL FREE NUMBER.
DO NOT DISPOSE OF YOUR CARTONS UNTIL YOU ARE COMPLETELY SATISFIED WITH YOUR NEW ULTIMATE PLATE.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2JCBP371WBL and is the answer not in the manual?

Questions and answers

Summary of Contents for Ultimate Plate 2JCBP371WBL

  • Page 1 CALL 1-800-459-4409 (8:30 AM - 5:00 PM EST) IMMEDIATELY FOR SERVICE. NOTE: DO NOT RETURN UNIT TO THE STORE BEFORE CALLING THE TOLL FREE NUMBER. DO NOT DISPOSE OF YOUR CARTONS UNTIL YOU ARE COMPLETELY SATISFIED WITH YOUR NEW ULTIMATE PLATE.
  • Page 2: Grounding Instructions

    1. The Ultimate Plate should never be left 17. The Ultimate Plate shall be set up in an area unattended when plugged in. Unplug from free of obstructions within at least 3 feet from outlet when not in use and before putting on or the platform.
  • Page 3 2. If you have any physical limitation or medical condition, seek the advice of physician before using the Ultimate Plate in order to avoid C. Do not lock any joints such as knees or possible personal injury. elbows but keep them bent slightly.
  • Page 4: Parts List

    INSTALLATION INSTRUCTIONS WARNING: BEFORE ASSEMBLING THE UNIT, MAKE SURE THE MAIN ON/OFF SWITCH IS IN THE OFF POSITION AND THE UNIT IS NOT PLUGGED IN. PARTS LIST 1) Upper handrail � � � � � � � � � � � � � � � � � � � � � � � � 1 2) Screw M6x16 �...
  • Page 5 Step 2: Attach 6 M8x30 screws [11] and washers [18] Step 4: Install the assembled handrail onto the base [6] onto the bottom of the support tube [5] and secure with with 4 M8x20 screws [12] and secure with the medium hex the large hex wrench [15]�...
  • Page 6 The assembled unit is shown in Fig. F. Press to select between High (H) or Low (L) vibration frequency� Press to select time - 15, 30,45 or 60 seconds� Press to select motions - oscillation, spiral or oscillation+spiral. Press to Start / Stop. Press to repeat the program�...
  • Page 7 The company’s sole When the Ultimate Plate is not in use, store in a dry obligation is to repair or replace the unit�...

Table of Contents