Table of Contents
Advertisement
Easy to Use!
•
Cut the fruit or vegetables into chunks, ensuring they are small enough to fit
through the guide hole.
•
Put the separating trough on the base and turn it firmly clockwise. Place the filter
into position on the connector, put on the transparent cover and lock using the
side catch. The inner lock switch will be connected automatically.
•
Place the fruit plate onto the transparent cover.
•
Place the juice cup underneath the juice outlet. Please note: Ensure that the juice
cup is placed with the pouring spout facing away from the appliance.
•
Plug in the appliance and press the 'Low' speed button.
•
Place the cut fruit or vegetables (only) onto the fruit plate and push them into
the guide hole with the fruit/vegetable press. Ensure that the volume of fruit or
vegetables is no more than 1/3 of the height of the guide hole, and press them
down gently.
•
After extracting every 600g of fruit or vegetables, remove the residue in the
separating trough.
•
Note: When the motor is running, insert only vegetables and pre-stoned fruit
peeled of inedible skin into the Juice Extractor. Do not insert fingers or any other
objects - always use the Fruit/Vegetable Press.
Troubleshooting
Fault
Motor does not operate.
Motor has overheated
or is emitting a burning
smell.
Cleaning and Maintenance
•
Take care when using the appliance, avoiding any bumps or knocks which could
cause damage.
•
After each use, clean the appliance and wipe dry with a cloth. Store in a dry
environment.
Possible Cause
Safety lock is not
connected.
Too much food in the
cup or the motor has
been running too long.
Juice Extractor
Suggestions
Re-assemble and ensure
that that all components
are fitted correctly.
Reduce the amount of
food used, allow the unit
to cool and try again.
Page 5
Advertisement
Table of Contents
