Advertisement
Quick Links
TOYOTA CANBUS
GSM TEXT PAGER
OPERATION AND INSTALLATION MANUAL
This Mongoose GSM text pager is exclusively designed to operate with
Toyota CAN BUS equipped vehicles.
This product can operate with or without an alarm system but for higher
security we recommend the fitment of the Mongoose/Toyota TA alarm
system which includes glass protection and a battery back-up siren.
For correct operation, please read this manual to familiarise yourself
with the features.
We advise professional installation of this product to ensure correct
operation.
1.
INSERT A GSM SIM CARD
2.
FROM YOUR MOBILE PHONE, SEND A 'PAIRING CODE' TEXT
MESSAGE TO THE PAGERS SIM CARD NUMBER.
3.
LEAVE THE DRIVERS WINDOW DOWN. LOCK YOUR VEHICLE
WITH THE TOYOTA REMOTE. THE PAGER IS NOW ACTIVE
AND IS READY TO SEND WARNING MESSAGES.
4.
TRIGGER THE PAGER BY OPENING THE DOOR FROM THE
INSIDE DOOR LOCK. A WARNING TEXT MESSAGE WILL BE
SENT TO YOUR MOBILE PHONE
5.
UNLOCKING YOUR VEHICLE WITH THE TOYOTA REMOTE
TURNS THE GSM PAGER OFF
SIM CARD (not supplied)
A GSM SIM card is required for this pager.
This pager operates on the Quad band and
Is generally compatible with all SIM cards.
The lowest cost option is generally the Pre-Pay type as text messages
sent from the pager should be minimal. If you choose a Pre-Pay card,
we recommend one that does not need to be removed from the pager
TTP
to re-charge credit. The pager module is mounted under the
Model:
dashboard, so it may not be readily accessible.
NOTE: This pager does not notify you if your Pre-Pay credit has
expired. Please complete the enclosed 're-charge' reminder label and
attach in a place in your vehicle easily seen by you.
5 SIMPLE OPERATION TEST STEPS
Australia
www.mongoose.com.au
sales@mongoose.com.au
New Zealand
www.mongoose.co.nz
sales@mongoose.co.nz
2
Advertisement
Summary of Contents for Mongoose TTP
- Page 1 NOTE: This pager does not notify you if your Pre-Pay credit has expired. Please complete the enclosed ‘re-charge’ reminder label and attach in a place in your vehicle easily seen by you. This Mongoose GSM text pager is exclusively designed to operate with Toyota CAN BUS equipped vehicles. Australia This product can operate with or without an alarm system but for higher www.mongoose.com.au...
- Page 2 PAIRING THE PAGER TO YOUR MOBILE PHONE & BASIC SET-UP CHANGING THE PASSWORD From the mobile phone that is going to receive the alarm messages, send a pairing code to the pagers SIM card phone number. To prevent someone interfering with your pager, it is recommended that you change the pagers default password.
- Page 3 CONTROLLING THE PAGER ACTIVATE GSM PAGER CONTROLLED OUTPUTS – OPTIONAL CONNECTION Lock your vehicle with the Toyota remote control: The pager has provision for two text controlled outputs. The pager is now active and ready for sending warning messages. Use of these outputs depends on the equipment level of the vehicle or other accessories fitted.
- Page 4 USER COMMANDS TO PAGER GSM TEXT MESSAGES “WARNING:- ALARM ACTIVATED” 1122#1 Pairing code This message will be sent if; 1 trigger – 1 message a.The vehicle alarm is triggered (if fitted) 1122#2 Pairing code a.A door is opened by means other than the factory remote/key 2 triggers –...
-
Page 5: Installation
Typical use is to turn on lights, sound a siren or control a relay for say a text controlled engine immobiliser. CONNECTOR #2 Use if connecting to another Mongoose Toyota Canbus control module. INITIAL POWER-UP & TESTING EG: TA alarm, TVSR voice safety reminder 1.The SIM card must be inserted before any plug connections are made or... - Page 6 Always disconnect power when inserting or removing. Green: Constant Negative (-) Output Blue: Pulse Negative (-) Output Connector #2 Plugs into other Mongoose Toyota Canbus module if fitted. BLUE LED DO NOT USE IF #1 USED Green: Constant Negative (-) Output...