Advertisement
2. Panel Control and Function
5.8GHz Transmitter / 5.8GHz Receiver
1 –Channel selector(5CH or 8CH).
8CH→No：0,1 is CH1； 8,9 is CH8
5CH→No：0,1 is CH1； 5,6,7,8,9 is CH5
2 –Video level adjustment
3 –Power indicator light.
4 –Power ON/OFF switch.
5 –DC power input.
6 –Audio jack left (white).
7 –Video jack BNC connector.
8 –Audio jack right (red).
9 –Antenna SMA connector.
4
3. Setup Guide
To enjoy a life of wireless video and audio, just connect the transmitter to any
A/V source you like and connect the receiver to a TV, monitor or speaker in
another location.
NOTE: Make sure the ON/OFF switch is in the 「OFF」position before connection
□ Transmitter
Connect one end of the RCA cable (or scart cable) to the audio and video jacks,
and connect the other end to a source device via its "AV output".
1. Connect the DC plug of the adapter to the DC jack, and connect the power
□ Receiver
1Connect one end of the RCA cable (or scart cable) to the audio and video jacks,
and connect the other end to a TV (or monitor, speakers) via its "AV input".
1. Connect the DC plug of the adapter to the DC jack, and connect the power
supply to an outlet.
5
Advertisement
