Connecting Your Loudspeakers - Scandyna PODSPEAKERS User Manual

ENGLISH /

Connecting your loudspeakers

We recommend that you read the manual of your amplifier or av-receiver carefully before connecting
your MicroPod SE loudspeakers. Please switch off all equipment when connecting MicroPod SE.
You are now ready to enjoy the great sound of MicroPod SE.
ENGLISH /
Running-in period
We recommend a running-in period of your new MicroPod SE loudspeaker of approximately 15-20 hours at normal listening level before you decide on the
final positioning of the loudspeaker. During the running-in period, the drive units will settle in and perform as intended.
ENGLISH /
Care and cleaning
We strongly advise against the use of any solvents or cleaners on the lacquered MicroPod SE cabinet. The cabinet surface usually only requires dusting or
cleaning with a damp soft cloth (only use cold clean water). Avoid touching the drive units, especially the tweeter, as damage may result.
ENGLISH /
Environmental information
MicroPod SE complies with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the
disposal of Waste Electrical and Electronic Equipment (WEEE) - the crossed bin symbol indicates compliance and that the products must be appropriately
recycled or processed in accordance with these directives.
The binding posts on the terminal
accepts wire up to Ø 4mm or cables
with bananaplugs.
Make sure that the positive terminal
binding posts on MicroPod SE (+) are
connected to the positive output
terminal binding posts on the ampli-
fier and that the negative terminals
on MicroPod SE (-) are connected to
the negative output terminal on the
amplifier.
// 7