System Configuration - Storage Options Ip camera Pro Instruction Manual

SYSTEM CONFIGURATION

Before using the network camera, make sure you have installed the supplied "Video Viewer" software, and configure
the camera's network settings. If not, please refer to your installer.
Note: You need to use the administrator account to enter the system configuration page. If you are logged in as a
user, please sign out and re-log into the camera using an admin account.
Click " " and select "
tree structure on the left panel as follows.
Main Menu Sub Menu
General
Log
Account
Online User
Trigger
Network
QoS
DDNS
SNTP
FTP
Mail
Filter
UPnP
Video
Camera
Colour
Time
" to enter the system configuration page. All the system configurations are listed as a
1. Check the firmware version and MAC address of the camera.
2. Change the camera title.
Check the system event logs.
1. Create a new user account with different access privilege.
2. Modify or delete an existing user account.
Check the current online user(s).
1. Enable / disable the motion detection.
2. Set the motion detection area.
3. Select the event notification method.
Configure network settings.
Limit the data flow for live streaming.
Enter DDNS information when the network type is PPPOE or DHCP.
Synchronize your camera time with the networked computer systems.
Enter the FTP information for event notifications when "FTP" is chosen in "General" → "Trigger".
Enter Email information for event notifications when "Email" is chosen in "General" → "Trigger".
Choose to permit or block the IP address(es) which can access this camera.
Allow this camera to be detected among devices within the same network area for easy and quick usage.
Set the image resolution, quality and frame rate.
Adjust the camera parameters if necessary.
Adjust the color performance.
Set daylight saving time and the current time.
Functionality
Page 13