Page 2
Introduction Installation Thanks for choosing the Vision’s wireless smoke detector of the home security device. This detector is a Z-Wave™ enabled device (interoperable, two-way RF mesh Notice: If you are installing the entire Z-Wave™ system for the first time, please refer to networking technology) and is fully compatible with any Z-Wave™...
Page 3
LOW BATTERY WARNING SIGNAL: If the alarm horn begins to chirp once in 43 free of charge. Vision does not issue any refunds. This warranty is extended to the seconds with red and yellow LED flashing, this signal means that the smoke alarm’s original end user purchase only and is not transferable.