Radio Mode - Ricatech RC1300 User Manual

Radio mode

1. Press and hold the PLAY button to turn on the device.
2. Use the buttons to select the "Radio" mode; press MENU to switch to
"Radio" mode.
3. Manual station browsing:
Use the buttons to browse the frequency band from 87.5
to 108 MHz in either forward or reverse. Press and hold the
buttons to switch to automatic browse mode until you
have found the desired station. Once the station is found,
press MENU then one of the
3. Press the MENU button, then the
can select between Save, Delete and Auto-scan.
4. To store the station sought in memory:
Press MENU to enter the FM submenu; select Save, then briefly press the
PLAY button to confirm.
5. Selective listening of stored stations: if several stations have been saved in
memory, you can listen to them one by one by pressing the PLAY button.
6. FM radio record function:
Your favourite programmes can be recorded while listening to them. Press
the and hold VOL button to enter the "Recording": the programme being
broadcasted can be saved in a record file. Press the MENU button to
deactivate the record function.
During the operation, the PLAY button can be pressed to pause recording.
7. Press the VOL button then press
8. Press and hold the MENU button to exit the Radio mode.
buttons to store it.
buttons, so that you
buttons to lower/raise the volume.
14