Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures� Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number)�
Keep this manual and the receipt in a safe and dry place for future reference�
reV 14g
When unpacking, make sure that the product is intact
and undamaged� If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible�
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools�
Diagrams within this manual may not be drawn proportionally� Due to continuing
improvements, actual product may differ slightly from the product described herein�
Tools required for assembly and service may not be included�
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
email our technical support at: productsupport@harborfreight.com
®
� All rights reserved�
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS ManuaL.
Advertisement
Summary of Contents for FASTEN-PRO 96755
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools� Diagrams within this manual may not be drawn proportionally� Due to continuing SaVe tHiS ManuaL.
-
Page 2: Table Of Contents
Indicates a hazardous situation which, if not avoided, could result in death or serious injury� Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury� Addresses practices not related to personal injury� Page 2 For technical questions, please call 1-888-866-5797. Item 96755... -
Page 3: Safety
NIOSH-approved for the specific hazards in the work area. 3� Do not overreach. Keep proper footing and balance at all times. This enables better control of the Tool in unexpected situations. Item 96755 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Maintenance
Tools are less likely to If unreadable or missing, contact bind and are easier to control. Harbor Freight Tools for a replacement. 5� use the tool, accessories and tool 12� Do not leave the tool unattended. bits etc. in accordance with these 13�... -
Page 5: Specifications
Spring loaded slide strip List of contents part(s) Description Staple Gun Standard Staples (500) T50, 3/8" crown x 5/16" L Brad Nails (500) 3/8" U-Shaped Staples (500) 1/4” crown x 1/2" L Item 96755 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 10� Functions Handle Depth adjustment Knob nose Staple channel Latch Figure a Page 6 For technical questions, please call 1-888-866-5797. Item 96755...
-
Page 7: Setup
3� There must not be objects, such as utility lines, nearby that will present a hazard while working� Item 96755 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Staple Gun and can be cleared Staple Channel� Pull the two tabs (located of any jammed fasteners� midpoint on the bottom of the Staple Gun) toward the back of the Staple Gun� Page 8 For technical questions, please call 1-888-866-5797. Item 96755...
-
Page 9: Operation
You may need to use long-nosed pliers (not included)� 3� Make certain that you are using correct size fasteners� 4� Replace Staple Channel� Follow all safety precautions whenever diagnosing or servicing the tool. Item 96755 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Parts List
If product has no serial number, record month and year of purchase instead� note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts� Page 10 For technical questions, please call 1-888-866-5797. Item 96755... - Page 11 Diagram Item 96755 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co� makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase� This...
Need help?
Do you have a question about the 96755 and is the answer not in the manual?
Questions and answers