■
To change the settings assigned to the control ring/control dial
Changes the settings assigned to the control ring/control dial.
Press [MENU/SET]
Press
Press
to select [Ring/Dial Set] and press [MENU/SET]
Press
to select [
[MENU/SET]
Press
to select the setting and press [MENU/SET]
The following settings can be assigned
• [Default Control]
• [Exposure Comp.]
• [White Balance]
Press [Q.MENU/ ] button several times
●
The assigned function setting applies to all the recording modes. However,
the assigned function may not operate when combined with certain
recording mode.
■
Using Quick menu
During recording, you can easily call some of the menu items and set them.
Press [Q.MENU/ ] button
Press
to select menu items
• The menu items and setting items that are displayed differ depending on
the recording mode.
Turn the control ring or control dial to change the setting
Press [MENU/SET]
to select [Setup] menu and press [MENU/SET]
] (control ring) or [
• [Zoom]
• [Aspect Ratio]
• [Not Set] (control ring only)
] (control dial), and then press
• [Step Zoom]
• [Sensitivity]
(ENG) VQT5E64
25